DAKOTA SOURCING

Product Description The DAKOTA SOURCING 13032 is a 90-degree copper street long elbow fitting designed for sweat-connect plumbing and refrigeration piping systems. It features a fitting-end (FTG) inlet and a copper-end (C) outlet, allowing it to insert directly into another fitting without a separate...

Product DescriptionThe DAKOTA SOURCING 36411 is a nipple storage box designed to organize and dispense 3/4-inch pipe nipples in a shop, warehouse, or service truck environment. The box holds up to 66 nipples, keeping fittings sorted by size and readily accessible during rough-in or...

Product Description The DAKOTA SOURCING 13122 is a copper reducing coupling designed to connect two different-diameter copper tubes in a sweat (CxC) configuration. It transitions from a 1-3/8 inch OD (1-1/4 inch ID) fitting end down to a 1-1/8 inch OD (1 inch ID)...

Product Description The DAKOTA SOURCING 13022 is a 90-degree copper street elbow designed for sweat-solder connections in residential and commercial plumbing systems. With a 5/8-inch outer diameter and 1/2-inch inner diameter, this fitting transitions flow direction at a right angle using a fitting-to-copper (FTG...

Product DescriptionThe DAKOTA SOURCING 13203 is a copper male adapter fitting designed to transition from a copper sweat connection to a male pipe thread. With a 5/8 inch outside diameter copper (C) socket end and a 1/2 inch male pipe thread (MPT) outlet, this...

Product DescriptionThe DAKOTA SOURCING 13219 is a copper cap fitting designed to seal the end of a copper tube or pipe. With an outside diameter of 1/2 inch and an inside diameter of 3/8 inch, this cap provides a secure, pressure-rated termination point for...

Product DescriptionThe DAKOTA SOURCING 13029 is a 90-degree copper street long elbow fitting used to change flow direction in copper tubing systems. It features a fitting-end (FTG) male inlet with a 1/2 inch outer diameter and a cup-end (C) female outlet with a 3/8...

Product DescriptionThe DAKOTA SOURCING 13015 is a 90-degree long-radius copper elbow fitting designed for sweat (solder) copper-to-copper connections. With an outer diameter of 3/4 inches and an inner diameter of 5/8 inches, this fitting redirects copper tubing runs at a right angle while maintaining...

Product Description The DAKOTA SOURCING 13017 is a 90-degree long-radius copper elbow with a 1-1/8 inch outer diameter and a 1 inch inner diameter, configured for copper-to-copper (C x C) sweat connections. This fitting is used to redirect refrigerant or fluid lines at a...

Product DescriptionThe DAKOTA SOURCING 13220 is a copper sweat cap used to terminate open copper tubing ends in plumbing, HVAC, and refrigeration systems. With an outside diameter of 5/8 inches and an inside diameter of 1/2 inches, this cap press-fits or solders onto standard...

Product DescriptionThe DAKOTA SOURCING 13207 is a copper male adapter fitting designed to transition between a copper tube connection and a male pipe thread (MPT) connection. The fitting accepts a 1-1/8 inch outer diameter copper tube on the sweat end and terminates in a...

Product Description The DAKOTA SOURCING 13106 is a copper coupling with a roll stop design, sized at 3/4 inch outer diameter and 5/8 inch inner diameter. It is used to join sections of copper tubing in plumbing, HVAC refrigerant piping, and hydronic heating systems....

Product DescriptionThe DAKOTA SOURCING 13047 is a 45-degree copper street elbow designed for sweat-solder plumbing connections in residential and light commercial piping systems. With a 5/8-inch outer diameter and 1/2-inch inner diameter, it follows the FTG x C (fitting-to-copper) connection pattern, allowing one male...

Product Description The DAKOTA SOURCING 12676 is a lead-free flare-to-male iron pipe (MIP) adapter designed to connect 1/4-inch flare fittings to 1/4-inch MIP threaded pipe connections. This fitting is commonly used in refrigeration and HVAC systems where copper tubing with flared ends must transition...

Product DescriptionThe DAKOTA SOURCING 18916 is a 7/8-inch cushion clamp designed to secure tubing, piping, and conduit runs in HVAC, plumbing, refrigeration, and mechanical systems. The cushion lining absorbs vibration and prevents metal-to-metal contact, protecting the pipe or tube surface from abrasion and noise...

Product Description The DAKOTA SOURCING 13036 is a 45-degree copper elbow fitting used to redirect copper tubing runs at a 45-degree angle in plumbing, HVAC, and refrigeration systems. It connects copper tube to copper tube using a sweat (solder) connection on both ends. The...

Product DescriptionThe DAKOTA SOURCING 13222 is a copper sweat cap used to terminate the end of a copper tube run in plumbing, HVAC, and refrigeration piping systems. With an outside diameter of 7/8 inches and an inside diameter of 3/4 inches, this cap fits...

Product DescriptionThe DAKOTA SOURCING 13120 is a copper reducing coupling designed to connect two different-diameter copper tubing lines in a sweat (solder) configuration. This fitting transitions from a 1-1/8 inch OD (1 inch ID) end to a 7/8 inch OD (3/4 inch ID) end,...

Product Description The DAKOTA SOURCING 13130 is a copper fitting reducer designed to transition between two different tube sizes in a sweat-connect piping system. The inlet end accepts a 3/4-inch OD fitting-style (FTG) connection and reduces to a 5/8-inch OD copper (C) sweat outlet....