DAKOTA SOURCING

Product Description The DAKOTA SOURCING 13105 is a copper roll-stop coupling designed for joining copper tubing in plumbing and HVAC refrigerant line applications. With a 5/8 inch outer diameter and 1/2 inch inner diameter, this coupling provides a reliable, pressure-rated connection between sections of...

Product Description The DAKOTA SOURCING 13020 is a 90-degree copper street elbow designed for use in plumbing and refrigeration tubing systems. With a 3/8-inch outer diameter (OD) fitting end and a 1/4-inch inner diameter (ID) cup end, this fitting connects directly into a socket...

Product Description The DAKOTA SOURCING 12679 is a lead-free flare-to-male iron pipe (MIP) adapter designed to connect a 3/8-inch flare fitting to a 1/2-inch MIP threaded fitting. This type of adapter is a standard component in refrigerant line, gas line, and potable water plumbing...

Product Description The DAKOTA SOURCING 13048 is a 45-degree copper street elbow designed for sweat-connection plumbing systems. It features a fitting (FTG) male end on one side and a copper (C) socket end on the other, allowing it to connect directly into a fitting...

Product DescriptionThe DAKOTA SOURCING 13132 is a copper reducer fitting configured in a fitting-to-copper (FTG x C) connection style. It reduces from a 7/8 inch OD (3/4 inch ID) sweat end to a 5/8 inch OD (1/2 inch ID) sweat end. This type of...

Product DescriptionThe DAKOTA SOURCING 36410 is a 1/2-inch nipple storage box designed to organize and dispense threaded pipe nipples in shop, van, or jobsite settings. Built to hold up to 77 nipples of the same nominal pipe size, this box keeps inventory sorted and...

Product Description The DAKOTA SOURCING 12646 is a 1/4-inch flare short bar stock nut designed for use in refrigerant, fuel gas, and fluid line connections where a flare fitting is required. This lead-free nut is machined from bar stock for consistent thread integrity and...

Product Description The DAKOTA SOURCING 15539 is a 60-amp non-fused metallic disconnect switch designed for safe electrical isolation of HVAC equipment, motors, and other load circuits. As a non-fused unit, it provides a dedicated means of disconnecting power without incorporating overcurrent protection, allowing the...

Product DescriptionThe DAKOTA SOURCING 13006 is a 90-degree copper elbow fitting designed for sweat (solder) connections in residential and commercial plumbing and HVAC refrigerant line applications. With a 7/8-inch outer diameter and 3/4-inch inner diameter, this C x C (copper-to-copper) fitting provides a reliable...

Product Description The DAKOTA SOURCING 13021 is a 90-degree copper street elbow designed for use in residential and light commercial plumbing systems. This fitting measures 1/2 inch outer diameter with a 3/8 inch inner diameter and connects using a fitting-to-copper (FTG x C) configuration....

Product DescriptionThe DAKOTA SOURCING 12658 is a short forged flare nut sized for 1/2-inch flare connections in refrigeration and HVAC applications. Forged construction provides greater strength and dimensional consistency compared to cast alternatives, making it a reliable choice for leak-free flare joints in refrigerant...

Product Description The DAKOTA SOURCING 13033 is a 90-degree copper street long elbow fitting designed for sweat-connect copper piping systems. With a 1-1/8 inch outer diameter and a 1 inch inner diameter, this fitting accepts a male FTG (fitting) end on one side and...

Product DescriptionThe DAKOTA SOURCING 18912 is a 3/8 inch cushion clamp designed to secure tubing, pipe, and conduit runs in place while protecting the line from vibration, abrasion, and metal-to-metal contact. The cushion lining absorbs mechanical vibration and prevents wear at the contact point,...

Product Description The DAKOTA SOURCING 13108 is a copper coupling designed for joining copper tubing in plumbing, HVAC, and refrigeration piping systems. It features a roll stop shoulder that seats the tube ends at a consistent depth, ensuring a reliable, leak-free solder or braze...

Product Description The DAKOTA SOURCING 13304 is a copper tee fitting designed for use in plumbing, HVAC, and refrigeration piping systems. This fitting connects three sections of copper tubing at a 90-degree branch point, allowing flow to be split or combined within a system....

Product DescriptionThe DAKOTA SOURCING 13116 is a copper reducing coupling in a C x C (copper-to-copper sweat) configuration, used to transition between two different tube sizes in a plumbing or HVAC refrigerant line. It connects a 3/4-inch OD (5/8-inch ID) tube on one end...

Product DescriptionThe DAKOTA SOURCING 13003 is a 90-degree copper elbow fitting designed for sweat (copper-to-copper) connections in residential and commercial plumbing and HVAC refrigerant piping systems. With an outside diameter of 0.5 inches and an inside diameter of 0.375 inches, this fitting directs copper...

Product DescriptionThe DAKOTA SOURCING 13119 is a copper reducing coupling designed for sweat-style (CxC) copper tubing connections. It transitions from a 7/8-inch OD (3/4-inch ID) female socket to a 5/8-inch OD (1/2-inch ID) female socket, allowing a plumber or HVAC technician to step down...

Product DescriptionThe DAKOTA SOURCING 12402 is a clear vinyl tubing sold in a 100-foot roll with a 3/8-inch inner diameter. This flexible, transparent tubing is commonly used to convey water, air, or light fluids in HVAC, plumbing, pool, and general mechanical service applications. The...