DAKOTA SOURCING

Product Description The DAKOTA SOURCING 13039 is a 45-degree copper elbow fitting designed for sweat-connect (C x C) copper tubing systems. With a 5/8-inch outside diameter and a 1/2-inch inside diameter, this fitting is sized for standard 1/2-inch nominal copper tubing. The 45-degree angle...

Product Description The DAKOTA SOURCING 13040 is a 45-degree copper elbow fitting used to change flow direction in copper tubing systems at a shallow angle. With a 3/4-inch outer diameter and 5/8-inch inner diameter, it connects using a copper-to-copper (C x C) sweat configuration....

Product DescriptionThe DAKOTA SOURCING 13126 is a copper fitting reducer designed to transition between two different tube sizes in a sweat-solder copper piping system. The fitting accepts a 1/2 inch OD FTG (fitting) inlet and reduces to a 3/8 inch OD capillary (C) outlet,...

Product DescriptionThe DAKOTA SOURCING 18913 is a 1/2-inch cushion clamp designed to secure tubing, pipe, and conduit runs in mechanical, plumbing, and HVAC installations. The clamp uses a cushioned lining to grip the pipe without marring the surface, reducing vibration transmission and preventing contact...

Product Description The DAKOTA SOURCING 13030 is a 90-degree copper street long elbow fitting used to change flow direction in copper plumbing and hydronic systems. Configured as FTG x C (fitting-to-copper), one end is sized to slip into a standard fitting socket while the...

Product Description The DAKOTA SOURCING 18639 is a gray plastic hanging strap used to support and secure pipes, conduit, and mechanical components in residential and commercial installations. Supplied in a continuous 100-foot roll, the strap measures 3/4 inch wide, making it easy to cut...

Product Description The Dakota Sourcing 18309 cork and rubber anti vibration isolation pads combine cork and rubber materials to reduce transmitted vibration and protect surfaces. They provide damping and isolation for appliances, equipment, electronics, and furniture by absorbing and dissipating mechanical energy at contact...

Product DescriptionThe DAKOTA SOURCING 13011 is a 90-degree long-radius elbow copper fitting designed for sweat (C x C) connections in residential and light commercial plumbing and HVAC refrigerant line applications. With a 3/8-inch outer diameter and a 1/4-inch inner diameter, this fitting allows a...

Product DescriptionThe DAKOTA SOURCING 12618 is a 90-degree flare elbow fitting designed to connect a 1/4-inch flare line to a 1/4-inch male iron pipe (MIP) thread. It changes the direction of a refrigerant or gas line by 90 degrees, allowing installers to route tubing...

Product Description The DAKOTA SOURCING 13004 is a 90-degree copper elbow fitting designed for sweat (C x C) connections in plumbing and HVAC refrigerant or water lines. With a 5/8 inch outer diameter and a 1/2 inch inner diameter, this fitting changes flow direction...

Product DescriptionThe DAKOTA SOURCING 13114 is a sweat-connect copper reducing coupling designed to transition between two different tube sizes in a single fitting. It connects a 5/8-inch OD (1/2-inch ID) tube on one end to a 1/2-inch OD (3/8-inch ID) tube on the other...

Product DescriptionThe DAKOTA SOURCING 12678 is a 3/8-inch flare by 3/8-inch male iron pipe (MIP) adapter designed for connecting flare-end tubing to threaded pipe fittings in refrigeration, HVAC, and gas line applications. This lead-free fitting meets modern plumbing and refrigeration safety standards, making it...

Product DescriptionThe DAKOTA SOURCING 13024 is a 90-degree copper street elbow designed for sweat-solder connections in residential and light commercial plumbing and HVAC refrigerant or hydronic piping systems. It features a fitting-to-copper (FTG x C) end configuration, with a 7/8-inch outer diameter and a...

Product Description The DAKOTA SOURCING 13303 is a copper tee fitting designed for use in plumbing and HVAC piping systems. It provides a three-way branch connection in a copper tube run, allowing a main line to split or accept a lateral feed. The 13303...

Product Description The DAKOTA SOURCING 13214 is a copper female adapter fitting designed to transition between copper tubing and female pipe thread connections. With a 7/8 inch outside diameter and a 3/4 inch inside diameter on the sweat end, paired with a 3/4 inch...

Product DescriptionThe DAKOTA SOURCING 18917 is a 1-1/8 inch cushion clamp designed to secure tubing, pipes, and conduit runs in HVAC, plumbing, and refrigeration applications. The cushion lining dampens vibration and protects the outer surface of the line from abrasion where it contacts the...

Product DescriptionThe DAKOTA SOURCING 12408 is a clear braided vinyl tubing sold in a 50-foot length with a 3/8-inch inner diameter. The braided construction reinforces the vinyl wall to resist kinking and pressure surges common in fluid-transfer applications. This type of flexible tubing is...

Product Description The DAKOTA SOURCING 13028 is a 90-degree copper street long elbow fitting designed for use in plumbing and hydronic piping systems. This fitting connects using a female fitting (FTG) end on one side and a copper sweat (C) end on the other,...

Product DescriptionThe DAKOTA SOURCING 12409 is a clear braided vinyl tubing sold in a 50-foot length with a 1/2-inch inner diameter. The braided construction reinforces the tubing wall to resist kinking and handle moderate pressure applications common in plumbing, HVAC condensate drainage, water transfer,...