DAKOTA SOURCING

Product DescriptionThe DAKOTA SOURCING 13114 is a sweat-connect copper reducing coupling designed to transition between two different tube sizes in a single fitting. It connects a 5/8-inch OD (1/2-inch ID) tube on one end to a 1/2-inch OD (3/8-inch ID) tube on the other...

Product DescriptionThe DAKOTA SOURCING 12678 is a 3/8-inch flare by 3/8-inch male iron pipe (MIP) adapter designed for connecting flare-end tubing to threaded pipe fittings in refrigeration, HVAC, and gas line applications. This lead-free fitting meets modern plumbing and refrigeration safety standards, making it...

Product DescriptionThe DAKOTA SOURCING 13024 is a 90-degree copper street elbow designed for sweat-solder connections in residential and light commercial plumbing and HVAC refrigerant or hydronic piping systems. It features a fitting-to-copper (FTG x C) end configuration, with a 7/8-inch outer diameter and a...

Product Description The DAKOTA SOURCING 13303 is a copper tee fitting designed for use in plumbing and HVAC piping systems. It provides a three-way branch connection in a copper tube run, allowing a main line to split or accept a lateral feed. The 13303...

Product Description The DAKOTA SOURCING 13214 is a copper female adapter fitting designed to transition between copper tubing and female pipe thread connections. With a 7/8 inch outside diameter and a 3/4 inch inside diameter on the sweat end, paired with a 3/4 inch...

Product DescriptionThe DAKOTA SOURCING 18917 is a 1-1/8 inch cushion clamp designed to secure tubing, pipes, and conduit runs in HVAC, plumbing, and refrigeration applications. The cushion lining dampens vibration and protects the outer surface of the line from abrasion where it contacts the...

Product DescriptionThe DAKOTA SOURCING 13112 is a copper reducing coupling in a C x C (copper-to-copper sweat) configuration. It connects a 3/8 inch OD (1/4 inch ID) tube on one end to a 5/16 inch OD (3/16 inch ID) tube on the other, allowing...

Product DescriptionThe DAKOTA SOURCING 12408 is a clear braided vinyl tubing sold in a 50-foot length with a 3/8-inch inner diameter. The braided construction reinforces the vinyl wall to resist kinking and pressure surges common in fluid-transfer applications. This type of flexible tubing is...

Product Description The DAKOTA SOURCING 13028 is a 90-degree copper street long elbow fitting designed for use in plumbing and hydronic piping systems. This fitting connects using a female fitting (FTG) end on one side and a copper sweat (C) end on the other,...

Product DescriptionThe DAKOTA SOURCING 12409 is a clear braided vinyl tubing sold in a 50-foot length with a 1/2-inch inner diameter. The braided construction reinforces the tubing wall to resist kinking and handle moderate pressure applications common in plumbing, HVAC condensate drainage, water transfer,...

Product DescriptionThe DAKOTA SOURCING 13014 is a 90-degree long-radius copper elbow fitting with a 5/8-inch outer diameter and 1/2-inch inner diameter, configured for copper-to-copper (C x C) sweat connections. Long-radius elbows reduce turbulence and pressure drop compared to short-radius fittings, making them a preferred...

Product Description The DAKOTA SOURCING 12653 is a 3/8 inch lead-free flare cap used to seal open flare fittings in gas and refrigeration piping systems. This cap threads onto a standard 3/8 inch flare fitting to close off unused ports, capped service lines, or...

Product Description The DAKOTA SOURCING 13133 is a copper fitting reducer designed to connect two different-size copper tubing runs in a sweat-fit piping system. This reducer accepts a 1-1/8 inch outer diameter (1 inch inner diameter) fitting-end connection on one side and a 7/8...

Product DescriptionThe DAKOTA SOURCING 13301 is a copper tee fitting designed for small-diameter tubing connections in refrigeration, HVAC, and plumbing applications. With a 0.25-inch outer diameter and 0.125-inch inner diameter, this tee allows a single line to branch into two paths without soldering complex...

Product DescriptionThe DAKOTA SOURCING 13042 is a 45-degree copper elbow fitting designed for sweat-connect (C x C) copper tubing systems. It accepts 1-1/8 inches outer diameter tubing with a 1 inch inner diameter and is used to redirect flow at a 45-degree angle in...

Product DescriptionThe DAKOTA SOURCING 13302 is a copper tee fitting designed for branching fluid or refrigerant lines in plumbing and HVAC applications. With a 3/8-inch outer diameter and 1/4-inch inner diameter, this tee provides a reliable three-way connection point in tubing runs. The all-copper...

Product DescriptionThe DAKOTA SOURCING 18915 is a 3/4-inch cushion clamp designed to secure and support tubing, pipe, or conduit runs in mechanical and trade installations. The cushion lining absorbs vibration and prevents metal-to-metal contact between the clamp and the pipe or tube surface, reducing...

Product Description The DAKOTA SOURCING 12647 is a short bar stock flare nut sized for 3/8-inch flare connections. Machined from lead-free bar stock, this nut is used to secure flare fittings in refrigerant, fuel gas, and potable water lines where lead-free compliance is required....

Product DescriptionThe DAKOTA SOURCING 13110 is a copper coupling with a roll stop designed for joining copper tubing in plumbing, HVAC, and refrigeration piping systems. The roll stop feature provides a positive seating point that controls insertion depth, ensuring consistent, repeatable joints during soldering...

Product Description The DAKOTA SOURCING 13306 is a copper tee fitting designed for use in plumbing and HVAC refrigerant or fluid distribution systems. It provides a three-way branch connection that allows a main line to split or combine flow at a 90-degree lateral. With...