Dakota Sourcing 13042 45 Degree Copper Elbow 1-1/8 in Od

Product Description

The DAKOTA SOURCING 13042 is a 45-degree copper elbow fitting designed for sweat-connect (C x C) copper tubing systems. It accepts 1-1/8 inches outer diameter tubing with a 1 inch inner diameter and is used to redirect flow at a 45-degree angle in refrigerant, HVAC, or plumbing lines. The cup-by-cup end configuration means both ends accept copper tubing for standard soldered joints. Licensed plumbers and HVAC technicians install this fitting during new construction, retrofit, or repair work on copper piping systems.

This elbow fitting is suited for residential and light commercial copper tubing installations where a 45-degree directional change is required. Common applications include refrigerant line sets, domestic water supply lines, and hydronic heating systems. The C x C connection style is compatible with standard sweat-soldering practices used throughout the plumbing and HVAC trades.

Key Features

• 45-degree angle for moderate directional changes in copper tubing runs
• Cup x Cup (C x C) ends accept standard copper tubing for soldered joints
• 1-1/8 inch OD and 1 inch ID sizing for proper tubing fitment
• Copper construction provides corrosion resistance and reliable long-term service
• Compatible with standard flux-and-solder installation methods

Compatibility

Designed as an OEM-style replacement or new-installation fitting for copper tubing systems using 1-1/8 inch OD tubing with a C x C sweat connection configuration.

Installation Notes

Installation should be performed by a licensed plumber or HVAC technician familiar with copper sweat-soldering techniques. Shut off and depressurize the system and drain all fluid from the line before cutting or fitting. Clean and flux all mating surfaces before applying heat and solder in accordance with applicable plumbing codes such as the IPC or IFGC. Avoid overheating the fitting, as excessive heat can damage the copper or cause incomplete solder joints.