ICP

Product Description The INTERNATIONAL COMFORT PRODUCTS ENDWX18L14A is a 1.5 ton, 18,000 BTU/hr vertical N-coil evaporator designed for upflow/downflow furnace applications. This 14-inch cased evaporator coil supports R-410A refrigerant and features a painted case with a factory-installed TXV. It offers reliable cooling performance for...

Product Description The INTERNATIONAL COMFORT PRODUCTS EVMWX30M17A is a 2.5 Ton horizontal cased evaporator V-coil designed for HVAC/R systems using R-410A refrigerant. This unit provides 30,000 BTU/hr cooling capacity with a flow rate of 750 to 1250 cfm. It features a durable, 24-gauge, pre-painted...

Product Description The ICP PGB424040K001B is a 2-ton packaged air conditioner designed for entry-level residential and light commercial cooling applications using R454B refrigerant. This self-contained unit houses the compressor, condenser coil, and evaporator coil in a single cabinet, simplifying installation where split-system configurations are...

Product DescriptionThe ICP ENDWX24L17A is a cased, vertical N-configuration evaporator coil designed for residential split-system air conditioning and heat pump applications using R-410A refrigerant. This coil mounts in the vertical position above or below the air handler or furnace, where it absorbs heat from...

Product Description The ICP FCMA5B48L0CA is a 4-ton modular fan coil unit engineered for use with R454B refrigerant in high-efficiency residential and light commercial air handling applications. Rated at 48,000 BTU/h nominal cooling capacity, this unit features a variable-speed blower motor that allows precise...

Product Description The ICP ENDWX30L14A is a cased, vertical N-coil evaporator coil designed for use with R-410A refrigerant in residential split-system air conditioning and heat pump applications. Shipped as a service replacement coil, it installs in the vertical orientation and arrives in a cased...

Product Description The ICP EVMWX36M17A is a cased, multipoise V-coil evaporator coil designed for use with R-410A refrigerant systems. Rated for 3 ton (36,000 BTU/h) capacity, it is factory-built for reliable heat transfer performance in forced-air cooling and heat pump systems. The cased design...

Product Description The ICP PHB436000K000B is a 3-ton residential heat pump designed to operate with R454B refrigerant, a lower-global-warming-potential alternative to legacy refrigerants now required under current EPA phasedown regulations. This unit is part of ICP's entry-level heat pump lineup, providing both heating and...

Product DescriptionThe ICP EVDWX24M14A is a cased, vertical-mount V-coil evaporator coil designed for residential split-system air conditioning and heat pump applications. Built for use with R-410A refrigerant, this 2-ton coil installs in the supply plenum above or beside a furnace or air handler in...

Product Description The ICP EVMWX48M21A is a cased V-coil evaporator coil designed for use with R-410A refrigerant in split-system residential air conditioning and heat pump applications. The V-coil configuration maximizes surface area within a compact cabinet, supporting efficient heat transfer across a range of...

Product DescriptionThe ICP EVDWX48M24A is a cased, vertical V-coil evaporator coil engineered for residential split-system air conditioning and heat pump applications using R-410A refrigerant. Rated at 4 tons (48,000 BTU/h), this coil is designed as a service replacement unit intended for vertical airflow installations....

Product Description The ICP evdwx48m21a is a 4-ton, 48,000 BTU/h cased V-coil evaporator designed for vertical upflow and downflow installations in split-system air conditioning applications. The coil ships in a 24-gauge, pre-painted cool gray steel cabinet with foil-faced R-2.1 insulation for quiet, efficient operation....

Product Description The ICP g97cmn0802120b is a high-efficiency, multi-positional gas furnace rated at 80,000 BTU/h with a 97% Annual Fuel Utilization Efficiency (AFUE) rating. It uses a modulating gas valve paired with a variable-speed blower motor to maintain consistent supply air temperatures and reduce...

Product Description The ICP eaa5x30m14a is an uncased vertical A-style evaporator coil designed for residential split-system air conditioning and heat pump applications. Rated at 30,000 BTU/h and sized for 2.5-ton systems, it operates with R-454B refrigerant, an A2L low-GWP refrigerant increasingly specified in new...

Product Description The ICP eam5x24m17a is a cased, multi-position evaporator A-coil rated at 2 tons and designed for use with R-454B refrigerant, an A2L low-global-warming-potential refrigerant. The coil ships factory-cased and uses a thermostatic expansion valve (TXV) for refrigerant control, providing accurate metering across...

Product DescriptionThe ICP eaa5x36m17a is a 3-ton uncased vertical A-style evaporator coil rated at 36,000 BTU/h and designed for use with R-454B refrigerant, an A2L low-GWP refrigerant now common in modern residential cooling systems. The aluminum coil construction resists corrosion and keeps weight low....