HANGERS

Product DescriptionThe Hangers 239CTP24010 hanger strap is a versatile solution for pipe hanging and support. This strap has a width of three-quarters of an inch, a thickness of twenty-four gauge, and a length of ten feet. Made from copper-plated steel, it offers durability and...

Product DescriptionThe HANGERS 320-4 is a reliable DWV (Drain, Waste, Vent) hanger suitable for supporting four-inch pipes. This product is made from durable carbon steel with a protective galvanized finish and features a plastic-coated sleeve. It is designed specifically for drain, waste, and vent...

Product DescriptionThe HANGERS 11B1200 is an adjustable standard clevis hanger made for suspending non-insulated, stationary pipe lines. This hanger is crafted from carbon steel with a plain finish, suitable for twelve inch pipes and seven eighths inch rods. It provides adjustable support and can...

Product DescriptionThe HANGERS 137SS0800 is a robust standard U-bolt specifically engineered for eight-inch pipes. Made from T-304 grade stainless steel, this bolt meets FIG 137 specifications ensuring reliability and durability in various installations. Designed for eight-inch pipes. Features a thread diameter of five-eighths by...

Product DescriptionThe HANGERS shhn050cp is a heavy hex nut threaded at 1/2-13 inches, manufactured from stainless steel for use in corrosive or high-load environments. Heavy hex nuts carry a wider bearing surface and greater thickness than standard hex nuts, making them the correct choice...

Product Description The HANGERS usfw0380100oz is a USS-standard flat washer designed to distribute load and protect fastener bearing surfaces in mechanical, plumbing, and electrical installations. It carries a 3/8-inch nominal bolt size, a 1-inch outside diameter, and a 7/16-inch inside diameter. The zinc finish...

Product Description The HANGERS usfw0750050op is a USS-standard flat washer in a 3/4-inch size with a plain (uncoated) finish. Flat washers distribute load across a fastener bearing surface, reducing the risk of pull-through and surface damage on bolted connections. This plain-finish washer is well...

Product DescriptionThe HANGERS sflw0500100op is a flat washer designed for use with 1/2-inch fasteners. Constructed from 18-8 stainless steel, it delivers reliable corrosion and wear resistance in demanding environments. The washer measures 1-1/4 inches in outer diameter and 0.065 inches in thickness, providing a...

Product Description The HANGERS 150m0050eg is a standard U-bolt pipe support fitting designed to secure 1/2 inch pipe with an outer diameter of 0.84 inches to 1/4 inch threaded rod. Constructed from steel with an electrogalvanized (EG) finish, this U-bolt provides corrosion resistance for...

Product Description The HANGERS 150m0150eg is an electrogalvanized steel U-bolt designed to support 1-1/2 inch pipe in general piping applications. It ships complete with four hex nuts, two pre-installed on each threaded leg, so the fastener is ready to mount without sourcing additional hardware....

Product DescriptionThe HANGERS 3250062pl is a side beam attachment designed to fasten threaded rod or similar supports to the lower flange of structural steel beams. Constructed from plain steel, this attachment accepts a flange or rod diameter up to 11/16 inches and carries a...

Product DescriptionThe CADDY bh0075cp is a steel bell hanger pipe clamp with a copper electroplated finish, designed to support 3/4-inch pipe in residential and commercial plumbing, HVAC, and mechanical installations. The bell-style body cradles the pipe at the correct height and orientation, securing it...

Product Description The HANGERS 150m0250eg is a standard U-bolt pipe hanger manufactured from steel with an electrogalvanized finish. Designed to secure a 2.5-inch nominal pipe with a 73 mm outer diameter, it accepts a 0.5-inch threaded rod and provides a rated static load of...

Product Description The HANGERS slick375 is a 3/8-16 threaded strut nut designed for use with channel and strut framing systems. Made from polyamide spring steel with an Armour finish, this slip-nut style fitting installs quickly into strut channel without tools, then locks in place...

Product Description The HANGERS 454008 CADDY Superfix is recommended for the suspension of stationary non-insulated pipe lines. This easy-to-close clamp is designed for steel pipe and copper tube. Its unique hinged design eliminates the need to disassemble the clamp prior to installation. Easy-to-close clamp...

Product Description The HANGERS 500173158 is a heavy-duty steel clevis hanger designed to support 12-inch pipe in mechanical and plumbing piping systems. This uncushioned hanger accommodates a 7/8-inch threaded rod and delivers a load capacity of 3,800 pounds, making it well suited for large-diameter...

Product Description The Nvent Caddy 4100350EG Clevis Hanger is a light-duty hanger designed for suspending stationary non-insulated pipe lines and insulated pipe lines. Flared edges prevent sharp surfaces from contacting the pipe, and the clevis bottom pivots to allow pipe to be fed from...

Product DescriptionThe Hangers LCSA0880400CP is a hex bolt made from steel. It measures seven-eighths by nine by four inches. This bolt is suitable for various fastening tasks, ensuring a strong and reliable connection. It is designed for stable joining in construction and mechanical projects....