Caddy bh0075cp Bell Hanger 3/4 Inch Copper Plated

Product Description

The CADDY bh0075cp is a steel bell hanger pipe clamp with a copper electroplated finish, designed to support 3/4-inch pipe in residential and commercial plumbing, HVAC, and mechanical installations. The bell-style body cradles the pipe at the correct height and orientation, securing it to structural surfaces such as wood framing, joists, or blocking. With an outer diameter capacity of 1.05 inches and a bell height of 0.75 inches, this clamp is sized specifically for standard 3/4-inch nominal pipe. Licensed plumbers, pipefitters, and mechanical contractors install this type of hanger during rough-in to meet spacing and support requirements defined by applicable codes.

The bh0075cp is suited for use in residential and light commercial piping systems where 3/4-inch pipe runs require secure, code-compliant support. Common applications include domestic water supply lines, hydronic heating piping, and similar small-diameter pipe installations routed through wood-framed construction. The copper electroplated finish provides surface compatibility in installations where bare steel is not acceptable, particularly near copper piping systems where contact corrosion is a consideration.

Key Features

• Bell hanger design supports 3/4-inch nominal pipe at a fixed position
• Copper electroplated finish over steel construction
• Outer diameter rating of 1.05 inches matches standard 3/4-inch nominal pipe OD
• Bell height of 0.75 inches provides consistent standoff from mounting surface
• Steel base material delivers structural rigidity under sustained pipe load

Compatibility

Designed as an OEM-style pipe support for 3/4-inch nominal pipe with an outer diameter of 1.05 inches, consistent with standard copper and other pipe types used in residential and commercial mechanical systems.

Installation Notes

Installation is typically performed by a licensed plumber or pipefitter during rough-in framing stages. Shut off the water supply and depressurize the line before repositioning or removing any existing supports. Hanger spacing should comply with IPC or applicable local plumbing code requirements for the pipe material and size being supported. Use fasteners appropriate for the mounting substrate to ensure the hanger remains secure under pipe load and thermal movement.

Technical Specifications

• Type: Bell Hanger
• Material: Steel
• Finish: Copper Electroplated
• Minimum Pipe Size: 0.75 inches
• Maximum Pipe Size: 0.75 inches
• Outer Diameter Capacity: 1.05 inches
• Bell Height: 0.75 inches
• UPC: 782856598138

Standard Information

• Brand: CADDY by nVent ERICO
• Manufacturer Part Number: bh0075cp