Hangers 150m0150eg U-bolt 1-1/2 Inch Pipe 4 Hex Nuts

Product Description

The HANGERS 150m0150eg is an electrogalvanized steel U-bolt designed to support 1-1/2 inch pipe in general piping applications. It ships complete with four hex nuts, two pre-installed on each threaded leg, so the fastener is ready to mount without sourcing additional hardware. The bolt body measures 4-5/16 inches in height with a 2.5-inch thread length on each leg. A 1,090-pound work load limit makes it suitable for a wide range of commercial and industrial pipe support tasks. Plumbers, pipefitters, and mechanical contractors use this fitting where a reliable, corrosion-resistant pipe clamp is required by spec or code.

This U-bolt is intended for general piping support in both commercial and residential mechanical systems. It conforms to federal specification WW-H-171 Type 24 and meets ANSI/MSS SP-58 Type 24, making it an accepted fastener on projects where those standards are referenced in the contract documents. The electrogalvanized coating provides corrosion resistance for indoor and moderately exposed environments. It is commonly installed on threaded rod drop hangers, strut channel, or structural steel to anchor pipe runs in place during and after system installation.

Key Features

• Fits 1-1/2 inch pipe for direct, snug engagement without shimming
• Includes 4 hex nuts (2 per leg) for secure double-nut lockdown
• Electrogalvanized steel construction resists corrosion in typical indoor mechanical environments
• 1,090-pound work load limit rated for demanding pipe support loads
• Conforms to ANSI/MSS SP-58 Type 24 and federal specification WW-H-171 Type 24
• 2.5-inch thread length per leg allows adjustment for varying strut or beam depths

Compatibility

Designed as an OEM-style replacement and standard pipe support component for 1-1/2 inch pipe in general piping systems conforming to ANSI/MSS SP-58 Type 24 requirements.

Installation Notes

Installation is typically performed by licensed plumbers or pipefitters as part of a pipe support system. Shut off and depressurize the piping system before repositioning or replacing existing hangers. Torque hex nuts evenly on both legs to prevent pipe misalignment, and verify the installed assembly meets the project-specified hanger spacing intervals per IFGC, IPC, or applicable mechanical code. Do not exceed the rated 1,090-pound work load limit.

Technical Specifications

• Fits Pipe Size: 1-1/2 inches
• Height: 4-5/16 inches
• Thread Length: 2.5 inches
• Work Load Limit: 1,090 pounds
• Material: Steel
• Coating: Electrogalvanized
• Drive Type: Hex
• ANSI Standard: ANSI SP-58 Type 24
• MSS Standard: MSS SP-58 Type 24
• UPC: 782856601593

Standard Information

• Brand: HANGERS
• Manufacturer Part Number: 150m0150eg