Value Collection 351-0606 Cylinder Mounted Point 8mm Ceramic

Product Description

The VALUE COLLECTION 351-0606 is a cylinder-shaped ceramic mounted point designed for precision grinding, deburring, and surface finishing on hard materials. The rubberized ceramic abrasive construction delivers consistent material removal at coarse grade (80 grit) with a hard hardness rating, making it well suited for aggressive stock removal on ferrous and non-ferrous metals, castings, and welds. It mounts on a 3/32-inch shank and is rated to 30,000 RPM, compatible with standard die grinders and rotary tools. Machinists, tool-and-die workers, and fabricators install this type of point for internal grinding and contour work where a larger wheel cannot reach.

This mounted point is used in metalworking, fabrication, and maintenance applications requiring controlled grinding in confined areas. The cylinder geometry makes it effective for flat-bottom cavities, slots, and surface blending. It is suited for bench-top rotary tools, flexible shaft machines, and pneumatic or electric die grinders. Typical applications include deburring cast iron, cleaning weld flash, and shaping hardened steel components in both shop and field settings.

Key Features

• Cylinder point shape provides flat-face and side-wall grinding capability
• Ceramic abrasive material with coarse grade (80 grit) for aggressive stock removal
• Hard hardness rating maintains shape under consistent pressure
• 30,000 RPM maximum speed rating suits standard die grinders and rotary tools
• 3/32-inch shank diameter fits common collet sizes on rotary and die grinder equipment
• Compact 8mm diameter by 20mm length accesses tight bores and contoured surfaces

Compatibility

Designed as a standard OEM-style mounted point for use with die grinders, rotary tools, and flexible shaft machines accepting a 3/32-inch shank collet.

Installation Notes

Installation should be performed by a machinist or qualified tradesperson familiar with abrasive tooling. Before mounting, confirm the spindle speed of the host tool does not exceed the 30,000 RPM rating of this point. Power down and disconnect the tool from its power source before inserting or removing the shank from the collet. Inspect the mounted point for chips or cracks before each use and replace if any damage is found.