Tools & Supplies: Power Tools, Hand Tools, Safety Gear & Brazing Supplies

Voomi Supply carries tools and supplies for professional and DIY jobs, including power tools, hand tools, hardware and supplies, safety and PPE supplies, welding and brazing supplies, and cleaning supplies. Brands include DeWalt, Milwaukee, Harris, and Hilmor. Compare sizes, ratings, and standards on each product page, plus US-based support to help you match the right tool or supply to your job.

Why buy from Voomidatasheet
CategoriesTools, hardware, safety, brazing, cleaning & more
ToolsPower tools and hand tools from top brands
SafetyFall protection, eyewear and other PPE
ShippingSame-day on select items ordered by 12 pm
BrandsDeWalt, Milwaukee & more
Find your tool or supply
Same-DayDispatch on select items ordered by 12 pm
10 CategoriesPower tools to restaurant supplies
LTL FreightLarge items ship by freight
Standards ListedANSI and OSHA ratings on safety gear
US SupportPhone, chat and email help

Popular tools & supplies

Shop all tools & supplies →

Brands we carry

Which tool or supply do I need?

Start with the job, then the hazard. Most orders pair a tool with the protective gear and consumables it needs, so it helps to plan them together.

What you need to doTool or supplyShop
Cut sheet metal, pipe, or tubingSnips and cuttersHand tools
Drill, grind, or sandCorded or cordless power toolsPower tools
Seal ductwork or fasten partsFoil tape, screws, lubricantsHardware & supplies
Braze copper refrigerant linesTorch outfit, filler rod, purge regulatorWelding & brazing supplies
Protect eyes, head, hearing, or lungsEyewear, respirators, hearing protectionSafety & PPE supplies
Work at heightHarness, lanyard, and anchorSafety & PPE supplies
Clean up after the jobCleaners and degreasersCleaning supplies

Hand tools and power tools for the trades

Hand tools cover cutting tools and hand saws, pliers and wrenches, ratchets and sockets, screwdrivers, measuring tools and levels, hammers, vises and clamps, and tool sets and storage. For HVAC sheet metal, the Midwest MWT-SS6510L snips are listed for 18 gauge cutting with a 1-1/4 inch length of cut, a left/offset pattern, drop-forged steel blades, and a 9-3/4 inch overall length. Power tools range from drills and impact drivers to grinders, sanders, saws, and heat guns, with cordless options from brands such as Milwaukee and DeWalt. Brushless motors cost more but use battery power more effectively, often extending run time by up to 50 percent according to our guide, and brushed motors suit occasional light-duty use. Cordless packs last longest when stored between 50 and 77 F at about 40 to 60 percent charge. Browse hand tools and power tools by type and brand.

Brazing and welding supplies

ItemWhat to know
Torch outfitThe Uniweld K23C is listed for light to medium brazing and welding, up to 1 inch copper tubing for brazing and 1/8 inch steel for welding; it includes regulators, a welding handle, two tips, goggles, a lighter, and a tank key, and ships without tanks
Filler rodThe Harris D620F15P Dynaflow is a phosphorus, copper, and silver alloy for copper-to-copper and copper-to-brass joints, 20 inch sticks, 28 per tube
Nitrogen purge regulatorThe Turbo Torch ESS32PFH580 has a CGA-580 inlet, a 1/4 inch SAE flare outlet, and an 800 psi maximum testing pressure for purging, brazing, and pressure testing
Protective gearHelmet or goggles, flame-resistant clothing, gloves, and respiratory protection suited to the process

Purging matters because oxygen inside a hot copper tube forms black cupric oxide scale that can break loose and travel into the TXV, capillary tubes, and compressor. Flowing nitrogen through the line during brazing prevents it, and the flow should come through a regulator or flow meter rather than raw cylinder pressure. Our welding safety guide recommends keeping flammable items at least 35 feet away and fire suppression equipment within reach. Find torches, rods, tips, and accessories in welding and brazing supplies, and the Harris Dynaflow rod, Uniweld K23C outfit, and Turbo Torch regulator are good places to start.

Safety and PPE

HazardProtection
Falls from heightIn construction OSHA requires protection at 6 feet or more above a lower level, using guardrails, safety nets, or a personal fall arrest system
Flying particles and debrisANSI/ISEA Z87.1 eyewear; Z87 for basic impact and Z87+ for high-velocity impact
Welding and brazing arc, sparks, and fumesWelding helmet or goggles, flame-resistant clothing, gloves, and a respirator
Grinding and sandingEye and face protection, respirator, gloves, hearing protection, and guards kept in place
Noise, dust, and chemicalsHearing protection, respiratory protection, and protective clothing

The FallTech 8144-L/XL is a belted, fall arrest and work positioning harness with hip D-rings and a user capacity of 134 to 310 lb under ANSI and 134 to 425 lb under OSHA, listed to ANSI Z359.11-2021 and OSHA 1926.502. A harness works only as part of a system with an anchor point and a connecting device, so read our guide on fall protection equipment. For everyday eye protection, the Edge Eyewear Dakura SW116 has smoke polycarbonate lenses, an anti-scratch coating, and a wraparound nylon frame, listed to ANSI/ISEA Z87.1-2015. Browse the full range in safety and PPE supplies.

Hardware, tapes, and jobsite extras

Hardware and supplies include adhesives and cements, caulks and sealants, hoses and tubing, lubricants, pipe fittings, screws, nuts and washers, tapes, and work lights. For ductwork, a UL 181 listed foil tape such as the Nashua 324A3, a 3 inch by 60 yard roll with a printed foil face, seals joints on HVAC ducts. The rest of the range supports the shop and the jobsite: cleaning supplies include all-purpose cleaners and industrial degreasers, janitorial supplies cover brooms, brushes, and bags, gardening and yard supplies cover shovels and sprayers, paint supplies cover brushes and spray paint, and restaurant supplies cover kitchen equipment. Browse hardware and supplies for fasteners and tapes, and cleaning supplies for degreasers and cleaners.

Before you braze: a safety checklist

  1. Wear the right PPE. Use eye protection or a helmet rated for the process, flame-resistant clothing, gloves, and a respirator when fumes are present.
  2. Clear the area. Keep flammable items at least 35 feet away and have fire suppression equipment within reach.
  3. Ventilate. Work where fumes can clear, and add respiratory protection when ventilation is limited.
  4. Set the purge. Connect the nitrogen regulator and use a low, regulated flow, not raw cylinder pressure.
  5. Braze, then cool under purge. Keep nitrogen flowing until the joint has cooled.
  6. Check your gear. Inspect hoses, regulators, and tips before each job, and follow your equipment maker's instructions.

Before you order: things to check

  • Match the standard to the hazard, for example ANSI/ISEA Z87.1 for eyewear and OSHA 1926.502 for harnesses
  • Check harness size and user weight range against the worker, such as the 134 to 310 lb ANSI range on the FallTech 8144
  • Confirm gauge capacity and cut pattern on snips, for example 18 gauge on the Midwest MWT-SS6510L
  • Remember that torch outfits can ship without cylinders, as the Uniweld K23C does, and plan for gas supply and a nitrogen regulator
  • Check battery and charger compatibility before ordering cordless tools
  • Check shipping and return terms on each listing, since stock status and final sale items differ

Tools & supplies glossary

Brazing alloy
A filler metal that melts above 840 F, below the melting point of the copper or brass pieces it joins, used for refrigerant line joints. Shop welding & brazing supplies →
Nitrogen purge
Flowing nitrogen through a tube during brazing to displace oxygen and prevent oxide scale inside the line. Shop welding & brazing supplies →
Oxy-acetylene outfit
A portable kit with regulators, hoses, a torch handle, and tips for brazing and welding with oxygen and acetylene. Shop welding & brazing supplies →
Left/offset snips
Metal-cutting snips with a bent head and handles that keep the hand clear of the sheet, available in left, right, and straight cutting patterns. Shop hand tools →
Full-body harness
A body harness with D-rings that spreads fall arrest forces across the thighs, chest, shoulders, and pelvis. Shop safety & PPE supplies →
Z87+
An ANSI/ISEA Z87.1 mark for safety eyewear that passes the high-velocity impact test. Shop safety & PPE supplies →
Brushless motor
A tool motor with electronic commutation instead of brushes, which wastes less energy as heat and needs less maintenance. Shop power tools →

Frequently asked questions

What does Tools & Supplies include?

The range covers ten areas: power tools, hand tools, hardware and supplies, safety and PPE, welding and brazing, cleaning supplies, gardening and yard supplies, janitorial supplies, paint supplies, and restaurant supplies. For HVAC and plumbing work, the most used areas are hand tools and power tools, safety gear, and brazing supplies. Each product page lists size, ratings, and standards, and our team can help match a tool or supply to your job.

Why do you purge refrigerant lines with nitrogen when brazing?

Heating copper in the presence of oxygen forms black, flaky cupric oxide scale on the inside of the tube. Flowing nitrogen through the line displaces the oxygen and prevents that scale, which would otherwise break loose and travel to parts such as the TXV, capillary tubes, and compressor. Guides commonly cite a low, continuous nitrogen flow at about 1.5 to 2 psi through a regulator or flow meter, never raw cylinder pressure, and keeping the flow until the joint cools. Follow your equipment maker's procedure, and see welding and brazing supplies for regulators, torches, and filler.

What does Z87 or Z87+ on safety glasses mean?

Both marks come from the ANSI/ISEA Z87.1 eyewear standard. Z87 marks eyewear that passes the basic impact test, while Z87+ marks eyewear that passes the high-velocity impact test, and for full high-impact compliance both the frame and the lens carry the Z87+ mark. Lens codes such as W for welding filters and D for dust or splash protection cover specialized hazards. Match the marking to the hazard on your job, and compare options in safety and PPE supplies.

When is fall protection required?

In construction, OSHA requires protection for employees on a surface with an unprotected side or edge 6 feet or more above a lower level, using guardrails, safety nets, or a personal fall arrest system. Our fall protection guide adds that general industry uses a 4 foot threshold. A harness is only one part of the system, which also needs a secure anchor point and a connecting device. Check the user weight range on the harness: the FallTech 8144-L/XL, for example, is listed for 134 to 310 lb under ANSI and 134 to 425 lb under OSHA.

Should I choose brushless or brushed power tools?

Brushed motors cost less and suit occasional or light-duty use, but the brushes wear and need replacement. Brushless motors cost more up front, use battery power more effectively, often extending run time by up to 50 percent according to our guide, and have no brushes to replace, which suits frequent heavy-duty work. Brushless is most common on cordless professional drills, saws, grinders, and sanders. Browse power tools by type and brand.

How do I make cordless tool batteries last longer?

Our battery guide recommends matching batteries and chargers from the same manufacturer, storing packs between 50 and 77 F at about 40 to 60 percent charge, and avoiding charging below 32 F or above 113 F. Charge after each session, remove packs once full, and let a hot pack cool before charging. Keep packs away from impact, moisture, and concrete floors. With proper care, lithium-ion packs typically last 3 to 5 years or 300 to 500 charge cycles.

What snips should I use for HVAC sheet metal?

Match the snip to the gauge and the cut. The Midwest MWT-SS6510L is listed for cutting 18 gauge material with a 1-1/4 inch length of cut, in a left/offset pattern with a straight blade and a 9-3/4 inch overall length. Heavier gauges need a tool rated for them, and offset handles keep your hand clear of the sheet. Compare cutters and other tools in hand tools.

How are tools and supplies shipped?

Orders placed before 12 pm ship the same day on in-stock items, and large items ship by LTL freight. Some listings, such as the Edge Eyewear Dakura safety glasses, are final sale with returns accepted only for damaged or defective items. Lead times can differ for special-order tools, so check the stock status and shipping terms on each product page, and contact us with the model number if you are unsure about a fit.

Read more

Visit the blog →

Keep shopping