Tru-maxx TM-207AB3SD2 Mounted Point W207 36 Grit

Product Description

The TRU-MAXX TM-207AB3SD2 is a cylinder-profile mounted point abrasive designed for precision grinding, deburring, and surface conditioning in metalworking and fabrication applications. It features a W207 cylinder shape with a zirconia alumina abrasive grain rated at 36 grit for coarse, aggressive stock removal. The 0.25-inch shank diameter fits standard die grinders and rotary tools, and the part is rated to a maximum of 24,000 RPM. At 3 inches overall length, it provides good reach into bores, slots, and contoured surfaces. Machinists, tool-and-die workers, and metal fabricators are the primary installers and users of this type of mounted point.

This mounted point is suited for grinding ferrous metals, stainless steel, and hard alloys where a coarse cut is needed to remove weld flash, clean up castings, or shape workpiece edges. The zirconia alumina grain self-sharpens during use, maintaining cut rate longer than standard aluminum oxide on tough materials. Typical use scenarios include weld prep, burr removal in tight areas, and mold or die finishing where a rotary die grinder is the primary tool. The 0.75-inch head thickness provides stable contact on flat and slightly curved surfaces.

Key Features

• W207 cylinder shape for flat-face and side grinding in confined areas
• Zirconia alumina abrasive grain for aggressive, self-sharpening stock removal on hard metals
• 36 grit coarse grade for fast material removal and weld flash cleanup
• 24,000 RPM maximum rated speed for use with standard die grinders
• 0.25-inch shank diameter fits widely available collets and die grinder chucks
• 3 inches overall length provides reach into recessed areas and bores

Compatibility

Designed for use with die grinders and rotary tools accepting a 0.25-inch shank collet. Verify the tool spindle speed does not exceed the 24,000 RPM maximum rating of this mounted point before use.

Installation Notes

Installation and use should be performed by machinists, fabricators, or other trained trades familiar with abrasive rotary tooling. Always confirm the mounted point is securely seated and tightened in the collet before operation, and never exceed the 24,000 RPM maximum speed rating. Wear appropriate eye protection and a face shield per ANSI B11 and OSHA abrasive safety requirements. Inspect the abrasive head for cracks or damage before each use and discard any mounted point showing signs of deterioration.