Southwire 411040506 Machine Tool Wire 12 Awg Blue 500 Ft

Product Description

The SOUTHWIRE 411040506 is a 12 AWG stranded machine tool wire rated for use in industrial control panels, automated machinery, and machine tool applications. Built with 65 strands of copper conductor and encased in a polyvinylchloride (PVC) insulation, this wire is engineered to flex and route through tight conduit and raceway paths inside equipment enclosures. The outside diameter measures 0.155 inches, and the wire is rated for a maximum operating temperature of 221 degrees F and a minimum of -22 degrees F. Its construction resists acids, moisture, and oils — conditions common in manufacturing and light industrial environments. Licensed electricians and industrial maintenance technicians are the primary installers.

This wire is suited for internal wiring of machine tools, automation control panels, and industrial equipment where flexible, multi-strand construction is required. The 500-foot spool length supports larger panel builds or multiple runs without splicing. The blue color coding aids circuit identification inside complex enclosures. It meets NFPA 79 requirements for electrical equipment of industrial machinery, making it appropriate for both OEM machine builds and field service work on existing equipment.

Key Features

• 12 AWG, 65-strand copper construction for flexibility in tight routing applications
• PVC insulation rated from -22 degrees F to 221 degrees F
• Outside diameter of 0.155 inches for consistent conduit fill calculations
• Resistant to acids, moisture, and oils for industrial environment durability
• Blue color coding for circuit identification in multi-wire enclosures
• Meets NFPA 79, UL 1063, UL 508, and multiple additional UL and CSA standards

Compatibility

Designed as an OEM-style and replacement machine tool wire for use in industrial control panels and automated machinery wiring applications requiring 12 AWG flexible stranded wire with PVC insulation per NFPA 79 and UL 1063.

Installation Notes

Installation should be performed by a licensed electrician or qualified industrial maintenance technician in accordance with NFPA 70 (NEC) and NFPA 79. De-energize all circuits and follow proper lockout/tagout procedures before routing or terminating wire inside any control panel or machine enclosure. Avoid sharp bends that could stress the insulation, and verify conduit fill does not exceed code-allowable limits before pulling wire. Confirm wire termination points are compatible with 12 AWG conductors before installation.