Rivetking ABL0625PBL/P100 Tri Folding Blind Rivet Size 625

Product Description

The RIVETKING ABL0625PBL/P100 is a tri folding blind rivet designed for applications where access is limited to one side of the workpiece. The dome head profile distributes clamping load across a broad surface, and the tri folding mandrel design expands the body into three distinct legs on the blind side, creating a large-footprint backside bearing surface. The aluminum body and aluminum mandrel make this rivet well suited for lightweight assemblies where corrosion resistance matters. With a tensile strength of 269 pounds and a shear strength of 202 pounds, it delivers reliable holding power for structural and semi-structural fastening tasks. Sheet metal workers, HVAC fabricators, and general trade installers are the primary users.

This rivet is used in residential and light commercial construction, HVAC ductwork fabrication, trailer assembly, signage, and general sheet metal work where a standard pop rivet would not provide sufficient blind-side bearing area. The size 625 designation corresponds to a 3/16-inch body diameter and a grip range of 0.04 to 0.354 inches, covering a wide range of material stack thicknesses in a single SKU. The brown painted finish provides a consistent appearance on visible assemblies. Each package contains 100 rivets.

Key Features

• Tri folding design expands into three legs on the blind side for increased bearing area compared to standard blind rivets
• Dome head with 0.386-inch head diameter and 0.386-inch head height for broad load distribution
• Wide grip range of 0.04 to 0.354 inches accommodates varied material stack thicknesses
• Aluminum body and aluminum mandrel for lightweight, corrosion-resistant fastening
• Tensile strength of 269 pounds and shear strength of 202 pounds
• Brown painted finish for consistent appearance on exposed surfaces

Compatibility

Designed for use in pre-drilled holes with a minimum diameter of 0.196 inches and a maximum diameter of 0.209 inches, suitable for sheet metal, aluminum panel, and similar thin-material assemblies requiring one-sided installation access.

Installation Notes

Installation requires a standard blind rivet pull tool sized for 3/16-inch rivets. Ensure the hole diameter falls within the specified 0.196 to 0.209-inch range before setting; an oversized hole will prevent proper mandrel-leg engagement on the blind side. Deburr holes prior to installation to avoid cracking in the substrate material. Verify that the total material stack thickness falls within the 0.04 to 0.354-inch grip range before selecting this rivet for the application.