Pal Lighting 64-egtmxcw-150 Nicheless Pool Spa Light

Product Description

The PAL LIGHTING 64-egtmxcw-150 is a nicheless in-wall LED pool and spa light designed for permanent installation without a traditional niche housing. It emits a cool white output and ships with 150 feet of cable and a plug-ready connection, making field wiring straightforward. This fixture is part of the Treo Max platform, which supports remote control operation as well as smartphone app control. Pool and spa service technicians install this unit directly into the vessel wall, eliminating the excavation and bonding work typically required for niche-based systems.

This light is suited for residential and light-commercial in-ground pool and spa applications where a low-profile, nicheless installation is preferred. The 150-foot cable length accommodates installations where the junction box or transformer is located at a significant distance from the fixture. The cool white color output is a fixed setting appropriate for pools and spas where a clean, neutral white appearance is the design goal. Compatible with remote controls and app-based control systems as supported by the Treo Max platform.

Key Features

• Nicheless design installs directly into the pool or spa wall without a separate niche housing
• Cool white fixed color output for a neutral, clean appearance
• Includes 150 feet of factory-attached cable with plug-ready termination
• Compatible with remote control and smartphone app operation via the Treo Max platform
• Low-profile form factor at approximately 3-1/3 inches face diameter

Compatibility

Designed as a nicheless in-wall replacement or new-installation fixture for residential and light-commercial pool and spa systems compatible with the PAL LIGHTING Treo Max platform. No additional specific model compatibility data was provided in the product data.

Installation Notes

Installation of low-voltage pool and spa lighting must comply with NEC Article 680 requirements for underwater luminaires and bonding. Power to the pool equipment panel must be shut off at the breaker before handling any fixture wiring or connections. A licensed electrician or qualified pool service technician should perform or verify all wiring connections and bonding continuity. The junction box must be positioned at the correct height above the waterline per code requirements for the installation location.