Lift-all UU1802DX6 Polyester Web Sling 2 in X 6 Ft

Product Description

The LIFT-ALL UU1802DX6 is a single-leg polyester web sling designed for vertical and choker rigging applications in industrial, construction, and material-handling environments. Built to a 2-inch width and 6-foot length, it delivers a 6,400 lb vertical capacity in a basket configuration and a 3,200 lb vertical capacity in a straight vertical hitch. The twisted eye ends allow secure, low-profile attachment to hooks and rigging hardware. Constructed from abrasion-resistant polyester webbing, this sling is rated for use in temperatures up to 200 degrees F. Riggers, millwrights, and material-handling crews install this sling as part of standard single-point or multi-leg lift configurations.

This sling is suited for general rigging and lifting in warehouses, fabrication shops, and construction sites where a lightweight, synthetic alternative to chain or wire rope is required. The polyester construction resists moisture and many common industrial chemicals, making it a practical choice for both indoor and outdoor lifts. It is built to a single-ply design with a twisted eye on each end for compatibility with standard rigging hooks and shackles.

Key Features

• 6,400 lb vertical basket capacity and 3,200 lb straight vertical hitch capacity
• 2,500 lb choker hitch capacity for wrap-style rigging
• Twisted eye ends for quick attachment to hooks and rigging hardware
• Abrasion-resistant polyester webbing rated to 200 degrees F maximum working temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Single-ply, single-leg construction in high-visibility yellow

Compatibility

Designed as a standard single-leg polyester web sling for use with rigging hardware sized for 2-inch webbing, including hooks and shackles rated at or above the sling working load limit.

Installation Notes

Rigging work should be performed by qualified personnel following OSHA 1910.184 and ASME B30.9 requirements. Inspect the sling for cuts, abrasions, UV degradation, and chemical damage before each use, and remove from service if any defect is found. Never exceed the rated working load limit for the chosen hitch configuration. Ensure load is balanced and contact edges are padded where sharp corners could cut the webbing.