Lift-all EN90X3 Endless Round Sling 8400 Lb Polyester

Product Description

The LIFT-ALL EN90X3 is a yellow polyester endless round sling rated for a vertical capacity of 8,400 pounds (4.20 tons) and a choker capacity of 6,700 pounds. At 3 feet in length with a sling diameter of 1.13 inches, this sling is built for rigging operations where a compact, lightweight lifting loop is required. Constructed from abrasion-resistant polyester, it is suited for use in environments where protecting the load surface matters. Licensed riggers, millwrights, and rigging crews install and use this sling in accordance with ASME B30.9 and OSHA regulations. It weighs 1.2 pounds, making it easy to handle and transport on the job site.

The EN90X3 is appropriate for light to medium-duty lifting tasks in industrial, manufacturing, warehouse, and construction settings. The endless configuration allows the sling to be used in vertical, choker, and basket hitches without dedicated hardware end fittings. Its polyester construction resists abrasion and handles loads cleanly up to a maximum service temperature of 200 degrees F, making it viable in a range of working environments where synthetic slings are permitted.

Key Features

• Vertical capacity of 8,400 pounds (4.20 tons) for single-leg straight lifts
• Choker capacity of 6,700 pounds for wrapped hitching applications
• Endless loop design supports vertical, choker, and basket hitch configurations
• Abrasion-resistant polyester construction protects both sling and load surface
• Rated for use up to 200 degrees F maximum service temperature
• Compliant with OSHA regulations and ASME B30.9 standards

Compatibility

Designed as an OEM-style endless round sling suitable for use with standard rigging hardware including shackles, hooks, and lifting beams where synthetic sling use is specified and a 3-foot endless loop configuration meets the application requirements.

Installation Notes

This sling must be inspected before each use by a qualified rigger in accordance with ASME B30.9. Remove the sling from service if cuts, abrasions, heat damage, chemical exposure, or distortion of the core are detected. Never exceed the rated load capacity for the hitch type in use, and ensure the load is fully de-energized and secured before attaching the sling. Installation and rigging operations should be performed by personnel trained and authorized under applicable OSHA and ASME rigging standards.