Lift-all EN1801DX10 Endless Polyester Sling 1in 10ft

Product Description

The LIFT-ALL EN1801DX10 is an endless loop polyester web sling rated for vertical lifts in rigging and material handling applications. Constructed from abrasion-resistant polyester webbing, this sling measures 1 inch wide and 10 feet in length with a vertical capacity of 3,200 pounds (1.60 tons) and a choker capacity of 2,500 pounds. The single-ply construction features a twisted eye configuration and meets OSHA 1910.184, ASME B30.9, and WSTDA standards. The yellow color coding aids in quick identification on the job site. Riggers, ironworkers, and material handling crews working in industrial, construction, and warehouse environments install and use this sling.

This sling is suited for single-leg vertical and choker hitch configurations in light to medium-duty lifting scenarios. The endless design distributes load evenly around the sling body, making it a practical choice for bundling, wrapping, or securing loads with irregular shapes. The polyester material resists moisture and most common chemicals encountered in industrial settings and is rated for use up to 200 degrees F. It is a one-leg sling intended for use where a low-profile, flexible lifting solution is needed.

Key Features

• Endless loop design distributes load along the full sling body for balanced lifts
• 3,200 lb vertical capacity and 2,500 lb choker capacity in a single-ply build
• Abrasion-resistant polyester webbing rated to 200 degrees F maximum working temperature
• Twisted eye configuration for compatibility with standard rigging hardware
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards
• Yellow color coding for rapid load capacity identification per industry convention

Compatibility

Designed as an OEM-style endless web sling for use in single-leg vertical or choker hitch rigging applications where a 1-inch-wide polyester sling with a 10-foot length is specified.

Installation Notes

Rigging and lifting operations using this sling must be performed by qualified personnel in accordance with OSHA 1910.184 and ASME B30.9. Inspect the sling for cuts, abrasions, broken stitching, or chemical damage before each use and remove from service if any defect is found. Never exceed the rated working load limit for the chosen hitch configuration. Avoid sharp edges on the load without appropriate edge protection to prevent sling damage.