Lift-all EE2801TFX7 Flat Eye Polyester Sling 1in 7ft

Product Description

The LIFT-ALL EE2801TFX7 is a two-ply, flat eye-and-eye polyester web sling rated for 3,200 pounds vertical capacity and 2,500 pounds in choker configuration. Measuring 1 inch wide and 7 feet long, this Type 3 sling is designed for controlled lifting and rigging operations where load protection and flexibility are critical. The flat eye terminations allow straightforward hook attachment without hardware modifications. Rated for use up to 200 degrees F, it is suited for industrial environments where temperature exposure is a factor. Rigging professionals and industrial maintenance crews are the primary installers of this sling type.

This sling is appropriate for general rigging, fabrication shops, manufacturing facilities, and construction sites requiring a lightweight, flexible synthetic lifting solution. The polyester construction resists moisture and most common shop-floor chemicals without significant capacity loss. It is intended for single-leg vertical lifts or choker hitches on loads within its rated working load limits. Applications include machinery moves, steel erection assists, and general material handling where wire rope would risk surface damage to finished or machined components.

Key Features

• 3,200 lb vertical working load limit and 2,500 lb choker capacity in a single-leg configuration
• Two-ply polyester webbing construction for abrasion resistance and load flexibility
• Flat eye terminations on both ends for direct hook or shackle attachment
• Rated to 200 degrees F maximum working temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards for synthetic web slings
• Lightweight polyester material protects sensitive or finished load surfaces

Compatibility

Designed as an OEM-style flat eye-and-eye Type 3 synthetic web sling for use with standard rigging hardware including hooks, shackles, and lifting beams rated at or above the sling working load limit.

Installation Notes

This sling must be installed by qualified rigging personnel following ASME B30.9 and applicable OSHA regulations. Inspect the sling for cuts, abrasion damage, UV degradation, and chemical contamination before each use. Never exceed the rated working load limit for the hitch type in use. Remove from service immediately if any core or cover damage, broken stitching, or distortion of the eyes is observed.