Lift-all EE2602DFX10 Flat Eye Polyester Web Sling 2in 10ft

Product Description

The LIFT-ALL EE2602DFX10 is a 2-ply flat eye-and-eye polyester web sling rated for rigging operations in industrial, construction, and warehouse environments. At 2 inches wide and 10 feet long, it delivers a vertical capacity of 4,800 pounds, a choker capacity of 3,800 pounds, and a basket capacity of 9,600 pounds. The flat eye configuration allows secure engagement with hooks, shackles, and lifting hardware without distorting the eye profile under load. Constructed from polyester webbing, the sling resists moisture, mildew, and common acids while maintaining consistent load ratings. Riggers and lifting specialists install this sling where a lightweight, flat-profile synthetic option is required.

This sling is suited for single-leg vertical, choker, and basket hitch configurations in general rigging applications. Typical use cases include steel fabrication shops, manufacturing facilities, and construction sites where loads require a soft sling to prevent surface marring. The yellow color aids quick visual identification on the job site. With a maximum rated temperature of 200 degrees F, it is appropriate for standard ambient-temperature lifts and is not intended for use near open flame or molten materials.

Key Features

• Flat eye-and-eye (Type 3) configuration for versatile hitch engagement
• 2-ply polyester construction rated at 4,800 lb vertical, 3,800 lb choker, and 9,600 lb basket
• Abrasion-resistant webbing extends service life in high-contact rigging scenarios
• Maximum working temperature of 200 degrees F
• Yellow color provides fast visual identification and condition inspection
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a standard flat eye-and-eye synthetic web sling for use with hooks, shackles, and rigging hardware sized to accept a 2-inch wide flat eye in single-leg vertical, choker, and basket hitch configurations.

Installation Notes

Inspection, rigging, and removal should be performed by a qualified rigger in accordance with ASME B30.9 and OSHA 1910.184. Before each lift, inspect the sling for cuts, burns, chemical damage, broken stitching, and distorted eyes. Never exceed the rated capacity for the hitch configuration in use, and do not use this sling over sharp edges without corner protection. Remove the sling from service immediately if any damage is detected.