Lift-all EE1802TTX12 Eye Eye Polyester Sling 2in 12ft

Product Description

The LIFT-ALL EE1802TTX12 is a single-leg, eye-and-eye polyester web sling with twisted eyes on both ends, designed for overhead lifting and rigging applications. It measures 2 inches wide and 12 feet long, with a vertical rated capacity of 3,200 lb and a choker rated capacity of 2,500 lb. Constructed from polyester webbing with a single-ply body, this sling offers abrasion resistance and is rated for use in temperatures up to 200 degrees F. Licensed riggers, millwrights, and industrial maintenance crews are the primary installers and operators of this sling type.

This sling is suited for general-purpose rigging in manufacturing, construction, and warehouse environments where synthetic web slings are preferred over wire rope or chain to protect delicate load surfaces. The twisted-eye configuration allows secure attachment to hooks and shackles at both the lifting point and the load. Single-leg vertical and choker hitches are the standard configurations for this product. It is color-coded gray and blue for load-capacity identification in the field.

Key Features

• Twisted eye-and-eye configuration on both ends for secure hook and shackle attachment
• 3,200 lb vertical rated capacity and 2,500 lb choker rated capacity
• Polyester construction provides abrasion resistance and load surface protection
• Rated for continuous use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Single-ply, single-leg design for straightforward vertical and choker hitch rigging

Compatibility

Designed as a standard eye-and-eye polyester web sling for use with compatible lifting hooks, shackles, and rigging hardware rated at or above the sling's working load limit.

Installation Notes

Inspect the sling before each use for cuts, abrasions, UV degradation, or chemical damage; remove from service immediately if any defects are found. Never exceed the rated working load limit for the chosen hitch configuration. Rigging operations must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Avoid contact with sharp edges on the load without appropriate corner protection.