Leviton Telcom WDR20-E Decora Plus Duplex Receptacle

Product Description

The LEVITON TELCOM WDR20-E is a Decora Plus duplex receptacle rated for 20 amperes at 125 volts in a 2-pole, 3-wire configuration. It carries a NEMA 5-20R receptacle designation, making it suitable for commercial and residential branch circuits that require 20-amp outlet capacity. Electricians install this device as a standard finish device wherever a flush, Decora-style wall plate aesthetic is specified alongside a full 20-amp rating. The unit ships as a single receptacle per package and is classified under hardware accessories.

This receptacle is used in commercial office builds, retail spaces, and residential applications where 20-amp dedicated or general-purpose circuits are required. It is appropriate for locations served by 12-gauge branch circuit wiring on a 20-amp breaker. The Decora form factor is widely specified in projects that standardize on a rocker-switch aesthetic throughout a facility or dwelling. Licensed electricians typically install this device during rough-in finish work or as a direct replacement for worn or damaged 20-amp duplex outlets.

Key Features

• 20-amp, 125-volt rating suitable for standard 20-amp branch circuits
• 2-pole, 3-wire NEMA 5-20R configuration accepts both 15-amp and 20-amp plug blades
• Decora Plus profile for compatibility with Decora-style wall plates
• Duplex design provides two outlet positions from a single device
• Single unit per package for straightforward job-site inventory

Compatibility

Designed as an OEM-style replacement or new-installation duplex receptacle for 20-amp, 125-volt, 2-pole 3-wire branch circuits using standard Decora-style wall plates.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Always de-energize the circuit at the breaker panel and verify absence of voltage with a non-contact tester before handling wiring. Use 12-AWG or heavier copper conductors on the 20-amp circuit feeding this device. Do not exceed the device voltage or amperage ratings.