Leviton Telcom TBR15-S2W Tamper-resistant Duplex Receptacle

Product Description

The LEVITON TELCOM TBR15-S2W is a tamper-resistant duplex electrical receptacle rated for 15 amps at 125 volts on a 2-pole, 3-wire configuration. It carries a NEMA 5-15R outlet configuration, meaning it accepts standard 15-amp, 125-volt plugs used throughout residential and light commercial wiring. The built-in tamper-resistant shutters block foreign object insertion while still allowing normal plug engagement. This receptacle is finished in white and is sold as a single unit. It is a standard-format device for licensed electricians working on outlet rough-in, device replacement, or code-compliance upgrades.

This receptacle is suited for residential wiring, light commercial buildouts, and renovation projects where tamper-resistant devices are required by code. The NEC mandates tamper-resistant receptacles in specific locations including kitchens, bathrooms, garages, and all readily accessible areas in dwelling units. Electricians installing devices under current NEC cycles will find this a direct fit for standard single-gang device boxes on 15-amp branch circuits.

Key Features

• Tamper-resistant shutters meet NEC requirements for dwelling unit receptacle locations
• NEMA 5-15R outlet configuration accepts standard 15-amp, 125-volt plugs
• 2-pole, 3-wire grounding design for proper equipment grounding continuity
• White finish suits standard residential and commercial wallplate installations
• Sold as a single device, unit of measure is each

Compatibility

Designed as an OEM-style replacement or new-installation device for standard single-gang electrical boxes on 15-amp, 125-volt branch circuits wired to NEMA 5-15R configuration.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code and all applicable local codes. De-energize the circuit at the breaker panel and verify absence of voltage with a meter before making any connections. Do not exceed the 15-amp branch circuit rating for this device. Secure the device in the box per standard device-loop or back-wire termination methods as allowed by the device markings.