Leviton Telcom MT830-IGT Duplex Receptacle 20A 125V

Product Description

The LEVITON TELCOM MT830-IGT is a duplex electrical receptacle built to hospital grade standards with isolated ground and tamper-resistant features. Rated at 20 amps and 125 volts, it is designed for demanding healthcare and critical-environment applications where power quality and safety are non-negotiable. The isolated ground circuit reduces electrical noise that can interfere with sensitive medical or electronic equipment. The tamper-resistant shutter mechanism blocks foreign object insertion, meeting code requirements for patient care areas and other protected locations. Licensed electricians typically install this receptacle in new construction and retrofit projects.

This receptacle is suited for hospital patient care areas, clinical labs, operating rooms, and other facilities that require hospital grade wiring devices under NFPA 99 and NEC guidelines. The isolated ground feature makes it a fit for environments with sensitive electronic equipment including diagnostic instruments and data systems. Its 20-amp, 125-volt rating supports standard single-phase branch circuits wired with 12 AWG conductors on a 20-amp overcurrent device.

Key Features

• Hospital grade construction meets elevated mechanical and electrical durability standards
• Isolated ground (IG) reduces electromagnetic interference to connected equipment
• Tamper-resistant shutters block accidental or intentional foreign object insertion
• 20-amp, 125-volt rating supports standard 20-amp branch circuits
• Duplex configuration provides two outlet positions from a single device

Compatibility

Designed as an OEM-style wiring device for 20-amp, 125-volt single-phase branch circuits requiring hospital grade isolated ground tamper-resistant duplex receptacles.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize the branch circuit at the panel and verify with a non-contact voltage tester before beginning work. The isolated ground terminal must be connected to a dedicated equipment grounding conductor run separately from the equipment grounding path to the panel. Do not connect the isolated ground terminal to a standard grounding conductor shared with other devices.