Kennametal 7096844 Grooving Insert A4G Carbide Altin

Product Description

The KENNAMETAL 7096844 is a carbide grooving insert designed for precision grooving operations on CNC lathes and turning centers. Built to the A4G insert style in size code 10, it features a neutral hand orientation and a cutting width of 0.3957 inches (10.050 mm). The insert is manufactured from carbide with an AlTiN coating applied via PVD process, grade KCU10B, providing wear resistance and thermal stability during interrupted and continuous grooving cuts. With two cutting edges and a double-end configuration, the 7096844 maximizes tool life per insert. A positive rake geometry reduces cutting forces and promotes clean chip flow.

This insert is suited for grooving applications in general metalworking environments, including OD grooving and parting on ferrous and non-ferrous workpieces. The 0.3190-inch (8.10 mm) maximum depth of cut accommodates standard grooving depths on medium-sized components. The clamp-style insert holding method provides secure seating and repeatable positioning. It fits the Kennametal A4 series toolholding system and is a multi-use tool compatible with various compatible A4-series holders for high-volume production turning environments.

Key Features

• A4G insert style, size 10, neutral hand for versatile setup on CNC turning equipment
• Carbide substrate with KCU10B grade and AlTiN PVD coating for extended tool life
• Cutting width of 0.3957 inches (10.050 mm) with a 0.0310-inch (0.80 mm) corner radius
• Maximum depth of cut of 0.3190 inches (8.10 mm) for medium grooving applications
• Double-end design with 2 cutting edges to maximize value per insert
• Positive rake geometry and GMP chip breaker promote efficient chip evacuation

Compatibility

Designed for use with Kennametal A4 series grooving toolholders that accept size 10 inserts with clamp-style holding. Consult the Kennametal A4 system toolholder documentation to confirm seat size and clamping compatibility before installation.

Installation Notes

Grooving inserts of this type are installed and replaced by qualified machinists or CNC tooling technicians. Power down and lock out the machine before changing inserts. Use appropriate torque on the clamping screw per the toolholder manufacturer specifications and ensure the insert is fully seated in the pocket before resuming operation. Handle carbide inserts with care to avoid chipping the cutting edges during installation.