Kennametal 7096340 Carbide Profiling Insert Rcgk Altin

Product Description

The KENNAMETAL 7096340 is a round carbide profiling insert designed for contour turning and profiling operations on CNC lathes and turning centers. Manufactured to ISO code RCGK060400HP and grade KCU10B, this insert features an AlTiN coating applied via PVD process, which supports performance in interrupted cuts and at elevated temperatures. With a 0.25-inch inscribed circle, a 0.358-inch thickness, and a 0.125-inch corner radius, this insert suits finish and semi-finish passes where consistent edge geometry is critical. A licensed machinist or CNC operator installs this insert as part of routine tooling changeovers.

This insert is suited for profiling, contouring, and copy turning applications in both production and job-shop environments. The round RCGK insert style with a neutral hand orientation allows use in multiple cut directions without repositioning the toolholder. Six cutting edges per insert reduce per-edge cost in high-volume turning operations. The maximum depth of cut is 0.0833 inches (2.12 mm), making it appropriate for light to moderate material removal in finishing passes on ferrous and non-ferrous workpieces.

Key Features

• ISO code RCGK060400HP with KCU10B carbide grade for consistent tooling standardization
• AlTiN coating via PVD process for heat resistance and extended edge life
• 6 usable cutting edges per insert for cost-efficient tooling management
• 0.125-inch corner radius supports smooth surface finish on profiled contours
• Neutral hand orientation for flexible cutting direction in contour turning
• Pin-style insert holding method for secure seating in compatible toolholders

Compatibility

Designed as an OEM-style replacement insert for RCGK-style toolholders accepting a 0.25-inch inscribed circle round insert with pin clamping. Verify toolholder pocket geometry and ISO seat designation before installation.

Installation Notes

Installation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before changing inserts. Use the appropriate torx or pin-clamp key to seat the insert firmly against the pocket without overtightening. Inspect the seat and shim for wear or debris before seating a new insert, as contamination in the pocket affects edge geometry and surface finish.