Kennametal 7093364 Vbgt Turning Insert Diamond Carbide

Product Description

The KENNAMETAL 7093364 is a VBGT-style turning insert designed for precision metal cutting operations on CNC and manual lathes. This carbide insert features a 35-degree diamond shape (V-code) with a neutral hand orientation, making it well-suited for finishing and light-to-medium turning passes where tight tolerances are required. The AlTiN coating under grade KCU10B provides thermal resistance and extended tool life in demanding cutting conditions. With a corner radius of 0.0157 inches (1/64 inch) and a 5-degree relief angle, the insert delivers sharp, controlled cuts on a variety of workpiece materials. Installation is performed by licensed machinists and tooling setters in production and job-shop environments.

This insert is used in external turning and profiling applications on CNC turning centers and engine lathes. The VBGT insert style is commonly applied in finishing operations where surface finish and dimensional accuracy are priorities. The 35-degree included angle allows access to shoulders and contours that wider insert geometries cannot reach. The HP chip breaker geometry supports chip control during continuous cuts. This insert is packaged individually and sold in multiples of 5.

Key Features

• VBGT insert style with 35-degree diamond shape for contour and shoulder turning
• AlTiN coating on KCU10B carbide grade for thermal resistance and wear life
• 0.0157 inch corner radius for fine finishing and tight-radius workpiece features
• 5-degree relief angle (clearance code B) reduces rubbing on the workpiece
• HP chip breaker geometry aids chip evacuation during continuous turning
• Neutral hand orientation fits both left- and right-hand compatible toolholders

Compatibility

Designed as an OEM-style replacement insert for VBGT-style turning toolholders accepting a size 221 insert with 1/8-inch thickness and 1/8-inch width. Confirm toolholder seat geometry and clamping style before installation.

Installation Notes

Insert installation and indexing should be performed by a qualified machinist or tooling technician. Power down and lock out the machine before changing inserts. Use the correct torque wrench and clamp screw specified by the toolholder manufacturer — do not overtighten the clamp screw, as carbide inserts are brittle and can fracture under excessive clamping force. Verify insert seating and run-out before returning the machine to service.