Kennametal 1015337 Double Angle Collet Chuck DA200

Product Description

The KENNAMETAL 1015337 is a double angle collet chuck with a straight shank, designed for precision workholding in CNC machining centers and milling applications. Built around the DA200 collet series, it delivers a total indicator runout (TIR) of 0.0001 inches, making it suitable for close-tolerance work where concentricity matters. The chuck features through-coolant capability via a through-spindle coolant path, keeping cutting zones clear during high-speed operations. At a balanced speed rating of 8,000 RPM, it suits production environments where both accuracy and cycle time are priorities. Licensed machinists and CNC setup technicians are the typical installers for this style of toolholder.

The 1015337 fits machine spindles accepting a 3/4 inch straight shank. It accommodates DA200 collets with a capacity range from 1/64 inch minimum to 25/64 inch maximum, covering common small-diameter end mill and drill shank sizes used in general machining, die work, and precision part production. With an overall length of 7.13 inches and a projection of 1.69 inches, it suits applications requiring moderate reach without excessive overhang. Actuation is performed with a standard wrench on the 0.84 inch hex diameter collet nut.

Key Features

• DA200 double angle collet system with 0.0001 inch TIR for precision concentricity
• Through-spindle coolant delivery keeps cutting zones clear during operation
• Balanced to 8,000 RPM for stable high-speed machining
• Collet capacity range from 1/64 inch to 25/64 inch covers common tooling shank sizes
• Wrench-actuated collet nut with 0.84 inch hex diameter for straightforward tool changes
• 3/4 inch straight shank for broad machine spindle compatibility

Compatibility

Designed for use with DA200 series double angle collets in machine spindles accepting a 3/4 inch straight shank. No specific machine model compatibility was provided in product data; confirm spindle interface requirements with machine documentation before ordering.

Installation Notes

Installation and tool changes should be performed by a qualified machinist or CNC setup technician with the machine powered down and all axes at rest. Use the appropriate wrench on the collet nut hex to seat and secure the collet; do not use impact tools on the collet nut. Verify through-coolant port alignment with the machine spindle coolant supply before operation. Inspect collet bore and chuck taper surfaces for chips or wear before each tool change to maintain stated TIR performance.