Iscar 6200315 HFPR6030 IC808 Grooving Insert 6mm Heliface

Product Description

The ISCAR 6200315 is an HFPR6030 IC808 grade solid carbide grooving insert designed for precision grooving and parting operations on CNC lathes and turning centers. Built from submicron carbide substrate and coated with an AlTiN, TiAlN, and TiN multilayer PVD finish, this insert delivers hardness and thermal resistance across a broad range of workpiece materials. The cutting width measures 6 mm (0.2362 inches) with a maximum depth of cut of 3 mm (0.1181 inches). A 7-degree positive rake angle reduces cutting forces and promotes clean chip evacuation. The insert is double-ended, yielding two usable cutting edges per insert. Licensed machinists and CNC operators working in production turning environments are the primary installers.

This insert suits universal application across multiple ISO material groups including steels (P), stainless steels (M), cast irons (K), heat-resistant superalloys (S), and hardened materials (H). It is part of the Heliface series and is well suited for external grooving, face grooving, and parting on small-to-medium diameter workpieces in both roughing and finishing passes where consistent groove geometry and surface finish are required.

Key Features

• IC808 submicron solid carbide substrate for toughness and wear resistance
• AlTiN, TiAlN, and TiN multilayer PVD coating for thermal protection and extended tool life
• 6 mm cutting width with full corner radius of 3 mm (0.1181 inches)
• Double-ended design provides two cutting edges per insert
• Positive 7-degree rake angle reduces cutting forces and improves chip flow
• Right-hand cutting orientation; clamp-style insert holding method
• Compliant with ISO 13399 tooling data standards

Compatibility

Designed for use with ISCAR Heliface series grooving toolholders that accept HFPR-style inserts with an insert size code of 6030. Compatible across universal workpiece material groups per ISO classification codes H, K, M, P, and S.

Installation Notes

Installation should be performed by a qualified machinist or CNC setup technician. Before changing inserts, confirm the machine spindle is fully stopped and the turret is in a safe index position. Seat the insert firmly in the toolholder pocket and verify the clamp secures the insert without rocking before resuming cutting. Do not exceed the rated maximum depth of cut for the insert size during initial test cuts.