Iscar 6200082 Grooving Insert HFPL6030 IC354 Carbide Ticn

Product Description

The ISCAR 6200082 is a solid carbide grooving insert in the Heliface series, designed for precision grooving operations on metal workpieces. It carries the HFPL insert style with a 6 mm cutting width and a maximum depth of cut of 3 mm. The insert features a TiCN coating applied via PVD process, a positive rake angle of 7 degrees, and a full corner radius of 3 mm. Left-hand orientation makes it suited for specific toolholder configurations where right-to-left cutting direction is required. This insert is installed by machinist tradespeople and CNC operators working in production or job-shop environments.

This insert is intended for grooving applications in stainless steel and steel workpieces, corresponding to ISO material codes M and P. The Heliface series is built for face grooving and profiling work where controlled chip evacuation and edge stability are critical. The 6030 insert size and HFPL style make it compatible with matching Heliface toolholders designed for that insert seat geometry. Typical applications include external and face grooving on turned components where dimensional accuracy and surface finish consistency are required across production runs.

Key Features

• Solid carbide construction with PVD-applied TiCN coating for wear resistance in steel and stainless steel
• 6 mm cutting width with a full corner radius of 3 mm for consistent groove geometry
• Maximum depth of cut range of 3 mm to 4 mm, nominal 3 mm
• Positive rake angle of 7 degrees reduces cutting forces and improves chip flow
• Left-hand insert orientation for dedicated toolholder configurations
• Conforms to ISO 13399 cutting tool data representation standards

Compatibility

Designed for use with Heliface series toolholders accepting the HFPL 6030 insert seat. Compatible with machining of stainless steel and steel workpieces (ISO material codes M and P). Verify toolholder insert pocket geometry matches HFPL style and left-hand orientation before installation.

Installation Notes

Installation is performed by qualified machinists or CNC operators. Ensure the machine spindle is fully stopped and all motion is locked out before seating or removing the insert. Use the correct torx or clamping key specified for the toolholder to secure the insert without over-torquing the clamp screw. Inspect the insert seat for chips or debris before seating a new insert, as contamination in the pocket affects cutting geometry and tool life.