Iscar 6200047 Grooving Insert HFPL6004 IC20 Solid Carbide

Product Description

The ISCAR 6200047 is a solid carbide grooving insert designed for precision groove turning and parting operations on CNC lathes and turning centers. Built to the HFPL6004 insert style, it features a 6 mm cutting width and a maximum depth of cut of 3 mm, making it well suited for shallow grooving passes where dimensional accuracy is critical. The uncoated IC20 carbide grade delivers a sharp, consistent edge without the thermal buildup associated with coated alternatives, and the positive 7-degree rake angle reduces cutting forces across a broad range of workpiece materials. Licensed machinists and CNC operators install this insert as a direct replacement in compatible Heliface toolholders.

This insert is intended for use in the ISCAR Heliface series tooling system. The left-hand orientation determines which side of the groove face it addresses, so verify toolholder hand before ordering. The double-end design provides two usable cutting edges per insert, extending service life between changeovers. With a primary workpiece material classification covering universal applications, it is suited for use on steel, stainless, cast iron, non-ferrous metals, and high-temperature alloys as defined by ISO material codes H, K, M, N, and S.

Key Features

• 6 mm cutting width for consistent groove dimension control
• Maximum depth of cut up to 3 mm, with a working range of 3 mm to 4 mm
• Solid carbide IC20 grade, uncoated, for sharp-edge performance across diverse materials
• Positive 7-degree rake angle reduces cutting forces and tool pressure
• Double-end insert provides two usable cutting edges per unit
• Conforms to ISO 13399 tooling data standards

Compatibility

Designed for use in ISCAR Heliface series grooving toolholders that accept HFPL6004-style inserts in left-hand orientation. Confirm toolholder insert seat and hand designation before installation.

Installation Notes

This insert is installed by a qualified CNC machinist or toolroom technician. Power down and lock out the machine spindle before seating or removing any insert. Use the correct torx or hex key specified by the toolholder manufacturer to secure the insert clamp to the recommended clamping torque per the toolholder documentation. Inspect the insert pocket and clamping screw for debris or damage before each insert change.