Iscar 6011380 Cutoff Insert Dgn 2002C IC808 2mm

Product Description

The ISCAR 6011380 is a solid carbide cutoff and grooving insert from the Do-Grip series, designated DGN 2002C in grade IC808. It features a 2 mm cutting width (0.0787 inches) and a neutral lead angle with a neutral hand orientation, making it equally effective in both directions of feed. The IC808 grade uses a PVD-applied multilayer coating — TiAlN, AlTiN, and TiN — engineered for wear resistance and thermal stability across a broad range of workpiece materials. The double-ended design extends usable tool life by providing two cutting edges per insert. This insert is installed by machinists and CNC operators in production turning environments.

This insert is suited for grooving and parting operations on CNC lathes and turning centers. The Universal primary workpiece material rating means it is compatible with steel, stainless steel, cast iron, non-ferrous alloys, and high-temperature superalloys — reflected in its ISO material group codes H, K, M, P, and S. The 0.20 mm corner radius (0.0079 inches) provides a controlled edge geometry for clean groove profiles and accurate parting cuts. Maximum depth of cut reaches 18 mm (0.7087 inches), making it practical for moderate-depth grooving and full parting on bar stock.

Key Features

• 2 mm cutting width (0.0787 inches) with matching 2 mm overall width for precise groove sizing
• Double-ended insert geometry provides two usable cutting edges per piece
• IC808 PVD multilayer coating (TiAlN, AlTiN, TiN) for extended tool life across multiple material groups
• Neutral lead angle and neutral hand for flexible feed direction in grooving and parting
• 0.20 mm corner radius (0.0079 inches) for accurate groove profile and reduced notching
• Maximum depth of cut of 18 mm (0.7087 inches) suitable for bar parting and deep grooving
• ISO 13399 compliant for tool data integration with CAM and tooling management systems

Compatibility

Designed for use in Do-Grip series cutoff and grooving toolholders that accept DGN 2002 style inserts. Confirm toolholder seat compatibility with the DGN insert style and 2002 size code before installation.

Installation Notes

This insert is seated and secured by a qualified machinist or CNC setup technician. Power down and lock out the machine spindle before changing inserts. Seat the insert fully into the Do-Grip toolholder pocket and verify clamping engagement before resuming operation. Do not exceed the published maximum depth of cut for the toolholder and insert combination.