Iscar 6003627 Cutoff Insert 2.39mm Carbide Pentacut

Product Description

The ISCAR 6003627 is a solid carbide cutoff and grooving insert from the PentaCut series, designed for precision parting, grooving, and recessing operations on CNC lathes and turning centers. It features a 2.39 mm (0.0941 inch) cutting width with a neutral lead angle and a left-hand insert orientation. The IC908 grade carbide substrate is applied with a PVD coating, delivering consistent edge integrity across a wide range of workpiece materials. A 0.15 mm corner radius and 5-degree relief angle support controlled chip formation in demanding production environments. Licensed machinists and CNC operators in metalworking shops install this insert as part of standard tooling maintenance.

This insert is suited for grooving and recessing applications across universal workpiece material groups including ferrous, non-ferrous, stainless, and high-temperature alloys. The PentaCut insert style supports multi-use tooling setups, making it appropriate for high-volume production turning where rapid insert indexing and consistent geometry are required. It is compatible with PentaCut-style insert holders designed for the PENTA34F2390 size code. The C chipbreaker geometry assists in chip evacuation during shallow grooving passes up to a maximum depth of 5.00 mm (0.1969 inch).

Key Features

• 2.39 mm (0.0941 inch) cutting width for precision grooving and parting
• IC908 grade solid carbide with PVD coating for extended tool life
• Neutral lead angle, left-hand orientation, 5-degree relief angle
• 0.15 mm corner radius with C chipbreaker geometry
• Multi-use insert compatible with universal workpiece material groups (ISO H, K, M, P, S)
• Maximum depth of cut: 5.00 mm (0.1969 inch)

Compatibility

Designed for use with PentaCut series insert holders accepting the PENTA34F2390 insert size code. Compatible with workpiece material grades C1, C2, C6, and C7 per ISO 13399 classification. Verify holder geometry and clamping style before installation.

Installation Notes

Installation is performed by qualified CNC machinists or tooling technicians. Power down and lock out the machine spindle before changing inserts. Seat the insert fully in the pocket and confirm clamping torque per the toolholder manufacturer specification. Inspect the insert seat and clamping screw for wear at each index interval.