Iscar 5605230 Milling Insert IC910 Carbide Square

Product Description

The ISCAR 5605230 is a solid carbide milling insert carrying the ANSI designation S845 SXMU 1606ADTR-MM IC910. It belongs to the HELIDO series and features a helical cutting edge geometry with a negative rake angle and a 90-degree included angle. The insert is double-sided with 8 usable cutting edges, maximizing tool life per unit. Manufactured from solid carbide and finished with an AlTiN coating applied via PVD process, it is engineered for productive milling in steel and cast iron applications. The IC910 grade targets general-purpose and heavy milling conditions where heat and wear resistance are critical.

This insert is intended for use in ISCAR S845 and F45SX cutter bodies in face milling and shoulder milling operations. It suits right-hand cutting configurations and is held in the cutter body by a screw clamp. Typical applications include roughing and semi-finishing of steel and cast iron workpieces in production machining environments. The MM chip breaker geometry supports controlled chip flow across a range of feed rates. Both ANSI and ISO 13399 standards are satisfied, making the insert compatible with tooling management systems that rely on standardized data.

Key Features

• Double-sided insert with 8 cutting edges for extended tool life per insert
• AlTiN PVD coating for high-temperature wear resistance in steel and cast iron
• Helical cutting edge style with negative rake reduces cutting forces on entry
• MM chip breaker geometry promotes reliable chip control
• 0.80 mm corner radius suits general-purpose profiling and shoulder milling
• Compatible with ISCAR S845 and F45SX cutter series

Compatibility

Designed for use with ISCAR S845 and F45SX cutter bodies. Verified compatible per the ANSI code S845 SXMU 1606ADTR-MM IC910 and ISO 13399 standardized data.

Installation Notes

Installation is performed by a machinist or tooling technician following the cutter body manufacturer torque guidelines for screw-clamped inserts. Ensure the cutter body pocket and seating surfaces are clean and free of chips before seating the insert. Confirm the insert is fully seated and the clamp screw is secured before spindle operation. Inspect cutting edges for wear at regular intervals and index or replace the insert before edge failure causes workpiece damage or cutter body wear.