Iscar 3602092 Dcln Turning Toolholder Rh Negative Rake

Product Description

The ISCAR 3602092 is a right-hand DCLN-style indexable turning toolholder designed for external turning operations on CNC and manual lathes. Built on ISCAR's Isoturn series, it features a negative rake angle of -6 degrees and accepts CN-style inserts secured by a mechanical clamp. The 3/4 inch by 3/4 inch square shank provides rigid, consistent setup in standard tool blocks. With an overall length of 4.5 inches and a head length of 1.4 inches, this toolholder suits a wide range of turning center setups where controlled cutting geometry and insert security are required.

This toolholder is intended for right-hand cutting direction on turning centers and lathes in production and job-shop environments. The 95-degree lead angle geometry is appropriate for straight turning and facing passes where a CN-style insert is the specified tooling choice. It is suited to both light and medium stock removal applications in ferrous and non-ferrous materials. Installation is performed by qualified machinists or CNC tooling technicians setting up turning centers for external diameter operations.

Key Features

• DCLN toolholder style with right-hand cutting direction
• Negative rake angle (-6 degrees) for controlled cutting geometry
• 3/4 inch x 3/4 inch square shank for standard tool block compatibility
• Accepts CN-style indexable inserts held by mechanical clamp
• Overall length of 4.5 inches with a 1.4 inch head length
• Isoturn series construction meeting ISO 13399 standards

Compatibility

Designed to accept CN-style indexable inserts (insert size code CN). Part of the ISCAR Isoturn series and conforms to ISO 13399 toolholder standards for use with compatible turning center tool blocks accepting a 3/4 inch square shank.

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling technician. Ensure the lathe or turning center is fully powered down and in a safe lockout/tagout state before mounting or removing the toolholder. Verify insert seating and clamp torque per the insert manufacturer's recommendation before initiating a cutting pass. Confirm shank seating depth and overhang are within the tool block manufacturer's specified limits to maintain rigidity and dimensional accuracy.