Goodman gpch33031 Packaged Ac 13.4 SEER2 2.5 Ton Horizontal

Product Description

The GOODMAN gpch33031 is a 2.5-ton horizontal packaged air conditioner rated at 13.4 SEER2 and 10.6 EER2, designed for ducted residential and light commercial applications. It uses R-32 refrigerant, operates on 208/230-volt single-phase power at 60 Hz, and delivers 27,000 BTU/h of rated cooling capacity through a single-stage scroll compressor. The unit ships factory-charged and is ETL listed. With a multi-speed indoor blower offering five speed settings and a maximum airflow of 925 cubic feet per minute, it is sized for horizontal installation in crawlspace or rooftop configurations. Licensed HVAC technicians perform the installation and commissioning of this equipment.

The gpch33031 is built for horizontal ducted installations in residential and multi-family construction where vertical clearance is limited and horizontal air discharge is required. Its self-contained, all-electric design integrates the condenser, evaporator, and blower in a single outdoor cabinet measuring 66 inches wide, 30 inches tall, and 34 inches deep. The unit is suited for new construction and replacement projects where a compact packaged platform and R-32 refrigerant compliance are required. Compatible accessory and component references include GPHMD101-103, PCCP101-103, PCEF101-103, PCMD101-103, PCP101-103, OT18-60A, IRKT-01, and SQRPCH101, among others listed in the factory documentation.

Key Features

• 13.4 SEER2 and 10.6 EER2 efficiency ratings for horizontal split-ducted applications
• Single-stage scroll compressor delivering 27,000 BTU/h rated and maximum cooling capacity
• R-32 refrigerant with 36-oz factory charge and orifice expansion device
• Multi-speed indoor blower motor with five speeds and 925 CFM high-speed airflow
• Copper condenser coil and aluminum evaporator coil with 74 dBA sound pressure at high cooling
• ETL listed; operates at 208/230 volts, 1-phase, 60 Hz with 30-amp maximum overcurrent protection

Compatibility

Compatible accessory and component references stated by the manufacturer include: 0259G00213, DDNECNJPCHHA, DHZECNJPGCHM, DPHFRA, GPHMD101-103, INFKPKG01, IRKT-01, OT18-60A, PCCP101-103, PCEF101-103, PCMD101-103, PCMDM101-103, PCP101-103, PCP101-103R8, SQRPC101, and SQRPCH101.

Installation Notes

Installation must be performed by a licensed HVAC technician holding the appropriate EPA Section 608 certification for R-32 refrigerant handling. Disconnect and lock out all electrical power before servicing any component. Horizontal packaged units require a level, structurally sound mounting surface and proper duct connections at the supply and return air openings; consult local mechanical codes and the unit installation manual for clearance, support, and condensate drain requirements. Do not operate the unit outside the specified voltage range of 187 to 253 volts or exceed the 30-amp maximum overcurrent protection rating.

Technical Specifications

• Cooling Capacity (Rated): 27,000 BTU/h
• Cooling Capacity (Sensible): 20,200 BTU/h
• SEER2: 13.4
• EER2: 10.6
• Tonnage: 2.5 tons
• Refrigerant Type: R-32
• Factory Refrigerant Charge: 36 oz
• Power Voltage: 208/230 volts
• Power Phase: 1-phase
• Power Frequency: 60 Hz
• Min. Circuit Amps: 20.8 A
• Max Overcurrent Protection: 30 A
• Min. Voltage: 187 volts
• Max Voltage: 253 volts
• Compressor Type: Scroll
• Compressor Stages: Single Stage
• Compressor RLA: 76 A
• Compressor LRA: 76 A
• Indoor Blower FLA: 3.8 A
• Outdoor Fan FLA: 0.95 A
• Outdoor Fan LRA: 2 A
• Total Unit Amps: 17.55 A
• Blower Motor Horsepower: 1/2 hp
• Condenser Fan Horsepower: 1/6 hp
• Air Flow Rate High (Cooling): 925 CFM
• Air Flow Rate High (Heating): 925 CFM
• Motor Speed Type: Multi-Speed
• Number of Speeds: 5
• Blower Diameter: 10 inches
• Blower Width: 8 inches
• Condenser Fan Diameter: 22 inches
• Condenser Fan RPM: 810 RPM
• Condenser Fan Blade Count: 3
• Condenser Coil Metal Type: Copper
• Condenser Coil Rows: 1
• Condenser Fin Density: 24 fins per inch
• Evaporator Coil Metal Type: Aluminum
• Evaporator Coil Rows: 3
• Evaporator Coil Face Area: 5.26 sq ft
• Evaporator Fin Density: 14 fins per inch
• Evaporator Motor RPM: 1050 RPM
• Expansion Device: Orifice
• Indoor Orifice Size: 0.053 inches
• External Static Pressure (Rated): 0.8 in w.g.
• System High Pressure: 660 psi
• Sound Pressure High (Cooling): 74 dBA
• Sensible Heat Ratio: 0.75
• Installation Configuration: Horizontal
• Installation Type: Ducted
• Unit Width: 66 inches
• Unit Height: 30 inches
• Unit Depth: 34 inches
• Unit Weight: 320 pounds
• Liquid Line Size: 3/8 inches
• Gas Line Size: 1/2 inches
• Condensate Drain Outlet: 3/4 inches
• Energy Source: Electric
• Current Type: AC
• Heat Exchanger Type: Air Cooled
• ETL Listed: Yes
• Rated Cooling Ambient DB: 95 degrees F
• Rated Cooling Ambient WB: 75 degrees F
• Warranty (Residential Registered): All Parts 10 Years
• Warranty (Residential Standard): All Parts 5 Years
• Warranty (Multi-Family Registered): All Parts 10 Years
• Warranty (Multi-Family Standard): All Parts 5 Years
• Warranty (Commercial): All Parts 5 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: gpch33031