Goodman gpch32431 Packaged Ac 13.4 SEER2 2 Ton Horizontal

Product Description

The GOODMAN gpch32431 is a 2-ton horizontal packaged air conditioner rated at 13.4 SEER2 and 10.6 EER2, designed for ducted outdoor installations where horizontal airflow discharge is required. It delivers 22,800 BTU/h of rated cooling capacity using R-32 refrigerant and a single-stage scroll compressor. The unit operates on 208/230 volts, single phase, 60 Hz, with a minimum circuit ampacity of 17.6 amps and a maximum overcurrent protection of 25 amps. A multi-speed indoor blower motor with five speed settings allows airflow to be matched to the duct system. Licensed HVAC technicians handle installation and commissioning of this equipment.

The gpch32431 is suited for residential and light commercial applications where crawlspace, closet, or other horizontal-configuration installations are required. The unit ships factory-charged with 38 ounces of R-32 refrigerant, eliminating field charging in standard installations. It is compatible with the accessory and control components listed under Goodman GPCH3 series references, including thermostat kits, disconnect boxes, and programmable controls identified in the manufacturer product reference list. Typical installations connect to existing low-voltage thermostat wiring and supply/return duct systems configured for horizontal airflow.

Key Features

• 13.4 SEER2 and 10.6 EER2 efficiency ratings for horizontal split-package configurations
• Single-stage scroll compressor with 22,800 BTU/h rated and maximum cooling capacity
• R-32 refrigerant with 38-ounce factory charge; orifice expansion device
• Multi-speed indoor blower motor with 5 speeds and 850 CFM high-speed airflow for both cooling and heating modes
• Copper condenser coil with aluminum evaporator coil; 22-inch, 3-blade condenser fan
• ETL Listed; horizontal installation configuration for ducted systems
• Sound pressure rated at 74 dBA at high-speed cooling operation

Compatibility

Designed for use with Goodman GPCH3 series accessory components including references DDNECNJPCHHA, DHZECNJPGCHM, DPHFRA, GPHMD101-103, INFKPKG01, IRKT-01, OT18-60A, PCCP101-103, PCEF101-103, PCMD101-103, PCMDM101-103, PCP101-103, PCP101-103R8, SQRPC101, and SQRPCH101. Confirm voltage, duct configuration, and refrigerant compatibility before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician holding the appropriate EPA Section 608 certification for handling R-32 refrigerant. Disconnect and lock out all electrical power before servicing. Verify that the supply circuit is sized to the 17.6-amp minimum circuit ampacity and protected by no more than a 25-amp overcurrent device per NEC requirements. Ensure horizontal duct connections and condensate drain piping, using the 3/4-inch drain outlet, are properly sloped and secured before startup.

Technical Specifications

• Cooling Capacity (Rated): 22,800 BTU/h
• Cooling Capacity (Sensible): 18,700 BTU/h
• Sensible Heat Ratio: 0.82
• SEER2: 13.4
• EER2: 10.6
• Tonnage: 2 tons
• Refrigerant Type: R-32
• Factory Refrigerant Charge: 38 oz
• Power Voltage: 208/230 volts
• Power Phase: 1 Ph
• Power Frequency: 60 Hz
• Min. Circuit Amps: 17.6 A
• Max Overcurrent Protection: 25 A
• Min. Voltage: 187 volts
• Max Voltage: 253 volts
• Compressor Type: Scroll, Single Stage
• Compressor RLA: 59.3 A
• Compressor LRA: 59.3 A
• Indoor Blower FLA: 3.8 A
• Outdoor Fan FLA: 0.95 A
• Total Unit Amps: 14.95 A
• Airflow Rate (High): 850 ft3/min
• Motor Speed Type: Multi-Speed (5 speeds)
• Blower Motor Horsepower: 1/2 hp
• Condenser Fan Horsepower: 1/6 hp
• Condenser Fan Diameter: 22 inches
• Condenser Fan Blade Count: 3
• Condenser Fan RPM: 810 RPM
• Condenser Coil Metal: Copper
• Evaporator Coil Metal: Aluminum
• Evap Coil Rows: 3
• Evap Coil Face Area: 5.26 ft2
• Evap Motor RPM: 1,050 RPM
• Expansion Device: Orifice
• Indoor Orifice Size: 0.047 inches
• External Static Pressure (Rated): 0.8 in w.g.
• System High Pressure: 660 psi
• Sound Pressure (High, Cooling): 74 dBA
• Unit Width: 66 inches
• Unit Height: 30 inches
• Unit Depth: 34 inches
• Blower Diameter: 10 inches
• Blower Width: 8 inches
• Gas Pipe Size: 1/2 inch
• Liquid Pipe Size: 3/8 inch
• Condensate Drain Outlet: 3/4 inch
• Unit Weight: 320 pounds
• Installation Configuration: Horizontal
• Installation Type: Ducted
• Energy Source: Electric
• ETL Listed: Yes
• Warranty (Residential Registered): All Parts 10 Years
• Warranty (Residential Standard): All Parts 5 Years
• Warranty (Commercial): All Parts 5 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: gpch32431