Goodman azv7sa3610 Split Heat Pump 3 Ton 17.5 SEER2

Product Description

The GOODMAN azv7sa3610 is a 3-ton, single-phase, inverter-driven outdoor split heat pump rated at 17.5 SEER2 and designed for ducted residential and light commercial applications. It operates on 208/230 volts at 60 Hz and uses R-32 refrigerant, a lower-GWP alternative to R-410A. The inverter compressor modulates capacity continuously, delivering a rated cooling output of 35,000 BTU/h and a rated heating output of 35,000 BTU/h. Side-discharge airflow simplifies installation in tight equipment yards and along building walls. The unit is manufactured in the United States and carries ENERGY STAR certification.

The azv7sa3610 is suited for ducted split systems in residential single-family, multi-family, and light commercial settings where DOE regional compliance across all climate zones is required. The non-communicating control interface pairs with standard 24-volt thermostats and conventional air handlers without proprietary communicating wiring. Heating operation extends down to -10 degrees F ambient, making it viable in colder climates. The COP at 47 degrees F is 3.3, and HSPF2 is rated at 8.8, confirming strong heating efficiency. SEER2 under high-solar/variable-temperature conditions reaches 19.

Key Features

• Inverter compressor with multi-speed fan motor for continuous capacity modulation and quiet operation at 70 dBA sound pressure
• R-32 refrigerant with factory charge of 100 oz and pre-charged line set support up to 15 feet
• Operates in cooling from 0 degrees F to 115 degrees F ambient; heating from -10 degrees F to 70 degrees F ambient
• Side-discharge configuration for space-constrained installations
• Non-communicating design compatible with standard 24-volt thermostats and conventional air handlers
• ENERGY STAR certified and DOE regionally compliant for all U.S. climate zones
• Manufactured in the United States; ISO certified

Compatibility

Designed for use in ducted split-system configurations as the outdoor condensing unit. Compatible accessory and component references noted in product documentation include 130-DK-008, DACA-WB-3, DQ-P-16-100, DSEN-HAQA, KEH3P573567, KPS00601, KPS00602, KPS00603, KPS00604, and KPW5G112. Consult the equipment submittals and product installation guide to confirm indoor unit and line-set compatibility before ordering.

Installation Notes

Installation must be performed by a licensed HVAC technician holding an EPA Section 608 certification, as R-32 is a mildly flammable (A2L) refrigerant requiring appropriate handling procedures and approved recovery equipment. Disconnect and lock out power at the disconnect box before making any electrical connections; verify that supply circuit protection does not exceed 35 amps and that wire gauge supports the 31.8-amp minimum circuit ampacity. Liquid line connection is 3/8 inch OD and suction line is 7/8 inch OD; maximum line set length is 100 feet with a maximum vertical separation of 90 feet. Follow local mechanical codes and the manufacturer installation instructions for pad mounting, refrigerant leak testing, and evacuation procedures before startup.