Genesis Cable 50075501 RG6 Quad Shield Coaxial Cable 500 Ft

Product Description

The GENESIS CABLE 50075501 is an RG6 quad-shield coaxial cable with a copper-clad steel (CCS) center conductor, designed for CATV, satellite, and broadband signal distribution. The quad-shield construction uses four layers of shielding to reduce ingress and egress interference, maintaining signal integrity across the run. This cable comes in a 500-foot box pull, making it well suited for residential and light commercial installations where longer runs are needed. Electricians and low-voltage technicians are the primary installers for this type of cable.

This RG6 CCS quad-shield cable is used in CATV, off-air antenna, and satellite TV distribution systems. It is appropriate for residential new construction, retrofit wiring, and MDU (multi-dwelling unit) installations. The white jacket is a standard choice for interior wall runs and plenum-adjacent applications where a clean finish is expected. The 500-foot box format allows smooth pulls without kinking.

Key Features

• Quad-shield construction provides four layers of shielding for high interference rejection
• Copper-clad steel (CCS) center conductor balances conductivity and tensile strength
• RG6 form factor compatible with standard F-type connectors and compression fittings
• White PVC jacket suits interior residential and commercial cable runs
• 500-foot box pull reduces handling time on longer installations
• Rated for CATV and broadband signal distribution applications

Compatibility

Designed as an OEM-style replacement and standard-install coaxial cable for RG6 quad-shield CATV and satellite distribution systems using F-type terminations.

Installation Notes

Low-voltage technicians and licensed electricians typically install this cable following local codes and TIA-568 structured cabling standards. De-energize all active signal equipment before terminating or splicing. Use a proper coaxial cable stripper and compression-style F-connectors rated for quad-shield RG6 to ensure full shielding contact. Avoid sharp bends below the cable minimum bend radius to prevent signal loss or jacket damage.