Genesis Cable 4513104Y 14/2 Solid Fplp Fire Alarm Cable

Product Description

The GENESIS CABLE 4513104Y is a 14/2 solid-conductor FPLP-rated fire alarm cable supplied on a 1000-foot roll. FPLP (Fire Alarm Cable, Plenum-Rated) designation means this cable meets the stringent smoke and flame spread requirements for installation in air-handling plenum spaces. The red jacket with yellow print coloring follows standard fire alarm industry convention for easy identification during rough-in and inspection. This cable is specified and installed by licensed fire alarm technicians and low-voltage electricians working on commercial and residential life-safety systems.

This cable is suited for use in fire alarm, detection, and notification circuits where a plenum-rated, unshielded solid-conductor wire is required. Its solid 14 AWG conductors make it appropriate for initiating device circuits, notification appliance circuits, and signal circuits in systems where plenum-rated pathways are required by the authority having jurisdiction. The 1000-foot roll size supports commercial installations and reduces the need for mid-run splices in larger runs.

Key Features

• FPLP plenum rating meets strict smoke and flame spread requirements for air-handling spaces
• 14 AWG solid conductors provide consistent conductivity across long cable runs
• 2-conductor configuration suits a wide range of fire alarm circuit applications
• Red jacket with yellow print follows standard fire alarm cable color conventions
• 1000-foot roll minimizes splice points on large commercial installations
• Unshielded design appropriate for general fire alarm signaling circuits

Compatibility

Designed for use in unshielded solid-conductor fire alarm wiring applications requiring FPLP plenum-rated cable per NFPA 72 and local code requirements.

Installation Notes

Installation must be performed by a licensed fire alarm technician or low-voltage electrician in accordance with NFPA 72, NFPA 70 (NEC Article 760), and all applicable local codes. De-energize all circuits before making connections and verify circuit polarity before restoring power. In plenum spaces, only FPLP or higher-rated cable may be used — do not substitute non-plenum cable in these pathways. Consult the authority having jurisdiction for labeling, routing, and inspection requirements prior to rough-in.