De-sta-co 207-S Toggle Clamp Vertical 499.08 Lb Flanged Base

Product Description

The DE-STA-CO 207-S is a manual hold-down toggle clamp designed for vertical clamping applications in industrial fixtures, welding jigs, and workholding setups. Built from carbon steel with a straight red handle, it delivers a holding capacity of 499.08 pounds (2,220 N) with a 57-degree handle movement arc and a 99-degree bar opening. The flanged base provides four-point mounting for rigid attachment to flat surfaces. A solid, closed-end bar transmits clamping force directly and consistently. This clamp is installed and adjusted by machinists, fixture builders, welders, and production technicians working in manufacturing and fabrication environments.

The 207-S fits standard workholding and fixturing applications where a vertical hold-down is required. The flanged base mounts to flat fixture plates, welding tables, or fabricated steel bases using four mounting holes with a 0.28-inch diameter. Mount hole spacing is 0.75 inches length-wise and 1.25 inches width-wise. With 1.25 inches of clearance under the bar and a front-of-base to toggle tip distance of 2.21 inches, this clamp suits medium-capacity clamping tasks in production or bench-top fixture work. A bolt retainer is included.

Key Features

• 499.08 lb (2,220 N) holding capacity for reliable medium-duty workholding
• Vertical handle orientation with 57-degree handle movement arc
• 99-degree bar opening for fast part loading and unloading
• Flanged base with four mounting holes for rigid, stable fixture attachment
• Solid closed-end bar in carbon steel for direct, consistent force transfer
• Includes bolt retainer for positive bar retention

Compatibility

Designed as an OEM-style hold-down toggle clamp for use in industrial fixtures, welding jigs, and workholding assemblies requiring a vertical, flanged-base clamp with solid bar construction.

Installation Notes

Installation is performed by fixture builders, machinists, or welding technicians. Mount the flanged base to a clean, flat surface using four fasteners through the 0.28-inch mounting holes before loading any workpiece. Verify the clamp is fully over-center in the locked position before applying load. Do not exceed the rated holding capacity of 499.08 pounds, and inspect pivot pins and bar hardware for wear at regular service intervals.