De-sta-co 207-37 Toggle Clamp Vertical 375 Lb U-bar

Product Description

The DE-STA-CO 207-37 is a manual hold-down toggle clamp designed for vertical clamping applications in fixtures, jigs, and workholding setups. It features a U-bar spindle arrangement with a flanged base, delivering a rated holding capacity of 375 pounds (1670 N). The straight red handle moves through 62 degrees of travel to actuate the clamp, while the bar opens to 115 degrees for part loading and unloading. Constructed from carbon steel throughout, the 207-37 is built for the repetitive cycle demands common in production and assembly environments. A fixed spindle with 5/16-18 thread and 1.3 inches of travel allows precise height adjustment at the clamping point.

This toggle clamp is suited for use on welding fixtures, assembly jigs, drill press tables, and fabrication workstations where consistent, repeatable part hold-down is required. The flanged base mounts to flat surfaces and accepts standard fastener hardware. At 3.75 inches overall length and 5.63 inches overall height, the 207-37 fits into moderate-footprint fixture designs. The clamp ships with two flanged washers, two nuts, and the spindle included. Machinists, fixture builders, and fabricators working in light-to-medium manufacturing environments are the typical installers.

Key Features

• 375 lb (1670 N) rated holding capacity for secure part clamping
• U-bar with fixed spindle and 5/16-18 thread for adjustable clamping height
• 62-degree handle movement with 115-degree bar opening for fast part loading
• Flanged base with 0.75 x 1.25 inch bolt pattern for surface mounting
• Full carbon steel construction including handle
• Includes flanged washers, nuts, and spindle - ready to install

Compatibility

Designed as a standard vertical hold-down toggle clamp for use in fixture, jig, and workholding applications requiring a flanged base mount and U-bar clamping style.

Installation Notes

Installation is typically performed by machinists or fixture builders using standard hand tools. Mount the flanged base to a rigid, flat surface using fasteners sized for the 0.28-inch diameter mounting holes and the 0.75 x 1.25 inch hole spacing. Adjust the spindle to the correct clamping height before locking the nuts. Confirm the clamp reaches the over-center lock position fully before putting the fixture into production use.