Boneham P2622GM Press Fit Headless Drill Bushing Steel

Product Description

The BONEHAM P2622GM is a press fit headless drill bushing designed to guide drill bits with precision in jig and fixture applications. Built to industry code P, this bushing features an inside diameter of 0.213 inches with a tight tolerance of +0.0001 to +0.0004 inches, ensuring accurate and repeatable hole placement. The body outside diameter is 13/32 inches, and the overall bushing length is 1-3/8 inches. Constructed from steel, the P2622GM is a non-renewable, fixed installation component pressed directly into a drill jig plate. It is installed by toolmakers, machinists, and fixture builders who require consistent bore guidance across production runs.

This bushing is suited for use in drill jigs where a permanent, headless profile is required to keep the bushing flush with or below the jig plate surface. The headless design allows work pieces to seat flat against the fixture without interference from a flange. The counterbored construction accommodates standard jig plate thicknesses and is appropriate for both prototype and production volume drilling operations across metalworking and manufacturing environments.

Key Features

• Press fit installation method for permanent, rigid seating in drill jig plates
• Headless design keeps bushing flush with fixture surface for unobstructed workpiece seating
• Inside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance
• Steel construction provides durability under repeated drilling cycles
• Counterbored configuration for compatibility with standard jig plate thicknesses
• Industry code P classification for straightforward cross-reference and replacement

Compatibility

Designed as a standard industry code P press fit headless drill bushing for use in drill jigs and machining fixtures requiring a 0.213 inch inside diameter and 13/32 inch outside diameter.

Installation Notes

Press fit bushings are installed by toolmakers or machinists using an arbor press or hydraulic press to seat the bushing into a properly toleranced jig plate bore. Power down all associated machinery before servicing or replacing jig components. Do not hammer bushings in with an unguided drift, as this can damage the bore tolerance. Verify the jig plate bore diameter matches the bushing outside diameter specification before pressing to ensure a secure, slip-free fit.