Boneham P2622FV Press Fit Headless Drill Bushing Steel

Product Description

The BONEHAM P2622FV is a press fit headless drill bushing designed to guide cutting tools with precision during drilling, reaming, and boring operations. Assigned industry code P, this bushing features a 0.191 inch (No. 11 wire gauge) inside diameter with a tight tolerance of +0.0001 to +0.0004 inches, ensuring accurate tool guidance and repeatable hole location. The body outside diameter measures 13/32 inches with an overall length of 1-3/8 inches. Constructed from steel and counterbored for proper seating, it is installed permanently into a jig plate without a retaining head. Machinists and tooling engineers working in production or maintenance environments specify this type of bushing for fixed, high-cycle drilling applications.

This bushing is suited for use in drill jigs and fixture plates where a permanent, renewable-free bushing installation is required. The headless profile keeps the bushing flush with or below the jig plate surface, making it appropriate for applications where clearance above the plate is limited or where a low-profile setup is needed. It is typically used in metalworking shops, maintenance facilities, and manufacturing environments handling repetitive hole-drilling operations that demand consistent positional accuracy across large production runs.

Key Features

• Industry code P press fit headless design for permanent jig installation
• Inside diameter of 0.191 inches (No. 11 wire gauge) with +0.0001 to +0.0004 inch tolerance for precise tool guidance
• Body outside diameter of 13/32 inches and overall length of 1-3/8 inches
• Counterbored construction for proper seating in jig plate
• Steel construction for durability in high-cycle drilling applications
• Non-renewable bushing type — intended for fixed, long-term installation

Compatibility

Designed as an OEM-style replacement or original-fit drill bushing for use in standard P-series drill jig plates and fixtures that accept press fit headless bushings with a 13/32 inch outside diameter.

Installation Notes

Press fit headless drill bushings are installed by toolmakers or machinist personnel using an arbor press or hydraulic press — never driven in with a hammer, as this can damage the bushing bore or distort the jig plate. The receiving hole in the jig plate must be machined to the appropriate interference fit tolerance for a P-series bushing before installation. Once pressed in, this bushing is not designed for removal and replacement. Always verify bore alignment and plate flatness before pressing the bushing into position.