Boneham P2022FG Press Fit Headless Drill Bushing

Product Description

The BONEHAM P2022FG is a press fit headless drill bushing designed to guide cutting tools with precision in jig and fixture applications. Built to ANSI standards, this bushing features an 11/64-inch inside diameter and a 5/16-inch body outside diameter, with an overall length of 1-3/8 inches. Constructed from steel hardened to 60 to 65 HRC, it delivers the wear resistance required for repetitive drilling operations. The headless, press fit design allows for a flush mount installation without protruding flanges, making it well suited for close-tolerance fixture work. Installation and replacement are handled by tool and die makers, machinist tradespeople, and precision fabricators.

This bushing is used in drill jigs, production fixtures, and precision machining setups where consistent hole location is critical. The counterbored design accommodates flush seating in prepared housings. It is appropriate for both light-production and high-cycle industrial environments where dimensional accuracy and bushing rigidity must be maintained across repeated tool passes. The P bushing industry code designates a standardized press fit headless type for straightforward fixture integration.

Key Features

• Press fit, headless design allows flush installation in jig plates and fixture housings
• Inside diameter of 11/64 inches with a tolerance of +0.0001 to +0.0004 inches for precise tool guidance
• Body outside diameter of 5/16 inches and overall length of 1-3/8 inches
• Steel construction hardened to 60 to 65 HRC for extended wear life under repetitive use
• Counterbored for proper seating in prepared fixture bores
• Meets ANSI standards for drill bushing dimensions and tolerances

Compatibility

Designed as an ANSI-standard press fit headless drill bushing suitable for use in drill jigs and machining fixtures requiring an 11/64-inch tool guide bore with a 5/16-inch press fit outside diameter.

Installation Notes

Press fit bushings are installed by tool and die makers or machinists using an arbor press or similar controlled-force equipment. The receiving bore should be prepared to the specified tolerance before pressing to avoid bushing distortion or damage to the fixture plate. Never drive the bushing with a hammer directly on the face. Once installed, the bushing is not intended for removal and reuse, as the press fit is a permanent installation.