Boneham H2622FV Press Fit Headed Drill Bushing Type H

Product Description

The BONEHAM H2622FV is a Type H press fit headed drill bushing designed to guide cutting tools with precision during drilling, reaming, and boring operations. Manufactured from steel, this bushing features an inside diameter of 0.191 inches (wire gauge #11) and a body outside diameter of 13/32 inches. The head outside diameter measures 1/2 inch with a head height of 5/32 inch, and the length under the head is 1-3/8 inches. The press fit installation method ensures a secure, permanent fit into the jig plate without the need for locking mechanisms. Machinists and tool and die technicians rely on this type of bushing for repeatable hole location accuracy in production jigs and fixtures.

This bushing is suited for use in drill jigs and fixture plates across metal fabrication, machining, and precision manufacturing environments. Its counterbored design accommodates flush or near-flush seating in jig bodies where tight tolerances are required. The non-renewable design makes it appropriate for fixed, high-volume production setups where the bushing is not expected to be replaced during the service life of the jig. It installs directly into the jig plate with a press and does not require secondary locking hardware.

Key Features

• Type H press fit headed design for permanent installation in drill jigs and fixture plates
• Inside diameter of 0.191 inches (wire gauge #11) with tolerance of +0.0001 to +0.0004 inches for tight tool guidance
• Steel construction for durability and wear resistance in production machining
• Counterbored head seats flush or recessed into jig body
• Head outside diameter of 1/2 inch and head height of 5/32 inch for positive seating
• Non-renewable design suited for fixed, long-run production jigs

Compatibility

Designed as an OEM-style replacement or new-installation component for standard drill jig and fixture plate applications requiring a Type H press fit headed bushing with a #11 wire gauge bore.

Installation Notes

Installation is performed by press fitting the bushing into a prepared jig plate bore using an arbor press or hydraulic press. Ensure the receiving bore in the jig plate is machined to the correct interference fit tolerance before pressing the bushing into place. Do not hammer the bushing directly, as this may damage the head or distort the bore geometry. This is a non-renewable bushing and is intended for permanent installation.