Boneham CB00001038 Slip-fixed Drill Bushing Steel

Product Description

The BONEHAM CB00001038 is a slip-fixed (SF) drill bushing used to guide cutting tools with precision during drilling, reaming, and similar machining operations. The bushing features an inside diameter of 0.0995 inches, a body outside diameter of 0.3125 inches (5/16 inch), and a length under head of 0.5 inches (1/2 inch). Constructed from steel and hardened to 60 to 65 HRC, this bushing is built to withstand the friction and wear demands of repeated production use. The head-type design and renewable configuration make it a practical choice for jig plate setups that require periodic bushing replacement without retooling the fixture itself. It conforms to ANSI standards.

This bushing is suited for use in drill jig applications across manufacturing, tool-and-die, and fabrication environments. Slip-fixed bushings are installed by pressing the body into a liner bushing already seated in the jig plate, then securing the bushing with a lock screw to prevent rotation or axial movement during the operation. The LS-1 compatible lock screw interface is standard for this bushing class. Typical users include machinists, toolmakers, and production technicians working with ferrous and non-ferrous materials. Inside diameter tolerance is held at plus 0.0001 to plus 0.0004 inches, providing consistent tool guidance across high-volume runs.

Key Features

• Slip-fixed (SF) bushing design for use with liner bushings in renewable jig setups
• 0.0995 inch inside diameter with a tolerance of plus 0.0001 to plus 0.0004 inches
• Steel construction hardened to 60 to 65 HRC for wear resistance
• Head-type configuration with a head outside diameter of 35/64 inch and head height of 1/4 inch
• LS-1 compatible lock screw interface for secure seating during operation
• Conforms to ANSI standards; renewable bushing design supports in-service replacement

Compatibility

Designed for use with LS-1 series lock screws and compatible liner bushings in standard ANSI slip-fixed drill jig configurations. No specific system or model compatibility data beyond these attributes was provided in the product data.

Installation Notes

Installation is typically performed by machinists or tool-and-die technicians. The bushing is inserted into a seated liner bushing in the jig plate and secured with an LS-1 compatible lock screw to prevent movement during drilling. Ensure the jig plate and liner bushing bore are clean and free of chips or burrs before seating. Always power down and lock out any associated machine before servicing or replacing bushings in a fixture.