Boneham AM00001076 Slip-fixed Drill Bushing Steel

Product Description

The BONEHAM AM00001076 is a slip-fixed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Manufactured from steel and hardened to 60 to 65 HRC, it delivers the wear resistance required in production drilling operations. The inside diameter measures 8.4 mm with a tolerance of +0.005 to +0.014 mm, providing controlled fit for drill guidance. The body outside diameter is 15 mm with a 28 mm length under the head. This bushing installs using the slip-fixed method and is classified under industry codes SF and SFM. It is a renewable bushing, allowing it to be removed and replaced without disturbing the bushing liner.

Slip-fixed bushings like the AM00001076 are used in production jigs where the same hole requires repeated drilling or where the bushing must be changed during a multi-operation sequence. The counterbored design and head configuration make this bushing well suited for close-tolerance fixture work in metalworking, machining, and fabrication environments. It is typically installed by toolmakers, fixture builders, or machinists working to ANSI standards for drill jig components.

Key Features

• Slip-fixed installation method allows removal and replacement during multi-step operations
• Renewable bushing design supports serviceability without full fixture disassembly
• Hardened steel construction at 60 to 65 HRC for long service life in production drilling
• Counterbored head with 26 mm head outside diameter and 8 mm head height
• Inside diameter tolerance of +0.005 to +0.014 mm for consistent tool guidance
• Conforms to ANSI standards for drill jig bushings

Compatibility

Designed as an OEM-style replacement or new-installation slip-fixed drill bushing for use in standard ANSI-compliant drill jigs and fixtures requiring an 8.4 mm inside diameter and 15 mm body outside diameter.

Installation Notes

Installation is performed by toolmakers or machinists fitting the bushing into a matching liner installed in the jig plate. Confirm the liner inside diameter and the jig plate clearance before pressing or seating the bushing. Follow ANSI jig bushing standards for proper seating depth and head clearance. Do not force the bushing into a liner with incompatible dimensions, as this can damage the bore tolerance.