Boneham AM00001042 Slip-fixed Drill Bushing Sfm

Product Description

The BONEHAM AM00001042 is a slip-fixed drill bushing conforming to the SFM industry code standard. It features a 7.5 mm inside diameter and a 12 mm body outside diameter, with a 12 mm length under the head. This type of bushing is pressed or slipped into a drill jig liner bushing and then locked in place to guide cutting tools accurately during machining operations. It is a renewable design, meaning it can be removed and replaced without disturbing the liner bushing already installed in the fixture. Machinists, tool and die makers, and jig and fixture builders are the primary installers of this component.

The AM00001042 is suited for use in precision drill jigs and fixtures in manufacturing and metalworking environments. The SFM bushing style is commonly used in production applications where the drill bushing must be changed to accommodate different operations on the same fixture, such as drilling followed by reaming or counterboring. Its renewable design makes it well suited for medium to high production runs where tool changeover is routine.

Key Features

• Slip-fixed installation method for secure seating in a liner bushing
• Renewable bushing design allows replacement without removing the liner
• SFM industry code compliance ensures dimensional interchangeability with standard tooling fixtures
• 7.5 mm inside diameter for accurate tool guidance
• 12 mm body outside diameter and 12 mm length under head

Compatibility

Designed as an OEM-style replacement or standard fitment for drill jig fixtures requiring an SFM-style slip-fixed renewable bushing with a 7.5 mm ID and 12 mm body OD.

Installation Notes

Installation is performed by machinists or tool and die makers working with drill jig fixtures. The bushing slips into a pre-installed liner bushing and is locked in position using the appropriate locking mechanism before any cutting tool is run through it. Ensure the liner bushing bore and the mating surfaces are clean and free of chips or burrs before installation. Always disengage and secure the machine before changing or inspecting drill bushings in a fixture.