Boneham AM00000892 Slip-fixed Drill Bushing Sfm 22mm

Product Description

The BONEHAM AM00000892 is a slip-fixed drill bushing manufactured to SFM industry standards. It is designed to guide drill bits and cutting tools with precision during machining and fabrication operations. The bushing features a 22 mm inside diameter, a 30 mm body outside diameter, and a 45 mm length under the head. Slip-fixed bushings of this type install into a liner bushing already pressed into a jig plate, allowing the bushing to be removed and replaced without disturbing the jig setup. Machinists, tool-and-die makers, and production drilling operations rely on this style of bushing to maintain hole location accuracy across repeated setups.

This bushing is suited for use in drill jigs across a range of metalworking and fabrication environments, including both job-shop and production floor settings. The SFM designation indicates a slip-fixed style with a head, which locks into the liner bushing via a quarter-turn and holds position during drilling. It is appropriate for applications where tooling must be changed between operations at the same jig location, such as when drilling is followed by reaming or counterboring at the same hole position.

Key Features

• SFM industry code: slip-fixed style with head for quarter-turn locking into liner bushing
• 22 mm inside diameter for consistent tool guidance
• 30 mm body outside diameter for proper fit in standard SFM liner bushings
• 45 mm length under head provides adequate tool guidance depth
• Renewable design allows bushing replacement without removing the liner from the jig plate
• UNSPSC Code 31171603 for procurement classification compliance

Compatibility

Designed as an OEM-style replacement or standard-fit drill jig bushing for use with liner bushings conforming to SFM industry dimensional standards at 22 mm inside diameter.

Installation Notes

Installation is performed by machinists or tooling technicians working with drill jig assemblies. Before replacing or inspecting the bushing, ensure the drill press or machining center is powered down and all tooling is clear of the work area. The slip-fixed bushing inserts into a compatible liner bushing and locks with a quarter-turn rotation — confirm the lock is fully engaged before beginning any drilling operation. Do not use this bushing without a properly installed liner bushing, as direct press-fit into the jig plate is not the intended installation method for this style.